[PATCH v7 2/3] clocksource: Add JH7110 timer driver
Emil Renner Berthing
emil.renner.berthing at canonical.com
Tue Oct 24 06:13:35 PDT 2023
Xingyu Wu wrote:
> Add timer driver for the StarFive JH7110 SoC.
>
> Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/clocksource/Kconfig | 11 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-jh7110.c | 380 +++++++++++++++++++++++++++++
> 4 files changed, 399 insertions(+)
> create mode 100644 drivers/clocksource/timer-jh7110.c
>
diff --git a/MAINTAINERS b/MAINTAINERS
> index 7a7bd8bd80e9..91c09b399131 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20473,6 +20473,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
> F: sound/soc/starfive/jh7110_tdm.c
>
> +STARFIVE JH7110 TIMER DRIVER
> +M: Samin Guo <samin.guo at starfivetech.com>
> +M: Xingyu Wu <xingyu.wu at starfivetech.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
> +F: drivers/clocksource/timer-jh7110.c
> +
> STARFIVE JH71X0 CLOCK DRIVERS
> M: Emil Renner Berthing <kernel at esmil.dk>
> M: Hal Feng <hal.feng at starfivetech.com>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 0ba0dc4ecf06..821abcc1e517 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -641,6 +641,17 @@ config RISCV_TIMER
> is accessed via both the SBI and the rdcycle instruction. This is
> required for all RISC-V systems.
>
> +config STARFIVE_JH7110_TIMER
> + bool "Timer for the STARFIVE JH7110 SoC"
> + depends on ARCH_STARFIVE || COMPILE_TEST
> + select TIMER_OF
> + select CLKSRC_MMIO
> + default ARCH_STARFIVE
> + help
> + This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
> + the system has started RISCV_TIMER, but you can also use this timer
> + which can provide four channels to do a lot more things on JH7110 SoC.
> +
> config CLINT_TIMER
> bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
> depends on GENERIC_SCHED_CLOCK && RISCV
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 368c3461dab8..b66ac05ec086 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
> obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
> +obj-$(CONFIG_STARFIVE_JH7110_TIMER) += timer-jh7110.o
> obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
> obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
> obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> diff --git a/drivers/clocksource/timer-jh7110.c b/drivers/clocksource/timer-jh7110.c
> new file mode 100644
> index 000000000000..71de29a3ec91
> --- /dev/null
> +++ b/drivers/clocksource/timer-jh7110.c
> @@ -0,0 +1,380 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive JH7110 Timer driver
> + *
> + * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
> + *
> + * Author:
> + * Xingyu Wu <xingyu.wu at starfivetech.com>
> + * Samin Guo <samin.guo at starfivetech.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/sched_clock.h>
> +
> +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> +#define JH7110_TIMER_CH_LEN 0x40
> +#define JH7110_TIMER_CH_BASE(x) ((x) * JH7110_TIMER_CH_LEN)
> +#define JH7110_TIMER_CH_MAX 4
> +
> +#define JH7110_CLOCK_SOURCE_RATING 200
> +#define JH7110_VALID_BITS 32
> +#define JH7110_DELAY_US 0
> +#define JH7110_TIMEOUT_US 10000
> +#define JH7110_CLOCKEVENT_RATING 300
> +#define JH7110_TIMER_MAX_TICKS 0xffffffff
> +#define JH7110_TIMER_MIN_TICKS 0xf
> +#define JH7110_TIMER_RELOAD_VALUE 0
> +
> +#define JH7110_TIMER_INT_STATUS 0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
> +#define JH7110_TIMER_CTL 0x04 /* RW[0]: 0-continuous run, 1-single run */
> +#define JH7110_TIMER_LOAD 0x08 /* RW: load value to counter */
> +#define JH7110_TIMER_ENABLE 0x10 /* RW[0]: timer enable register */
> +#define JH7110_TIMER_RELOAD 0x14 /* RW: write 1 or 0 both reload counter */
> +#define JH7110_TIMER_VALUE 0x18 /* RO: timer value register */
> +#define JH7110_TIMER_INT_CLR 0x20 /* RW: timer interrupt clear register */
> +#define JH7110_TIMER_INT_MASK 0x24 /* RW[0]: timer interrupt mask register */
> +
> +#define JH7110_TIMER_INT_CLR_ENA BIT(0)
> +#define JH7110_TIMER_INT_CLR_AVA_MASK BIT(1)
> +
> +struct jh7110_clkevt {
> + struct clock_event_device evt;
> + struct clocksource cs;
> + bool cs_is_valid;
> + struct clk *clk;
> + struct reset_control *rst;
> + u32 rate;
> + u32 reload_val;
> + void __iomem *base;
> + char name[sizeof("jh7110-timer.chX")];
> +};
Maybe sort this by alignment so you save a few bytes. Eg. something like
struct jh7110_clkevt {
struct clock_event_device evt;
struct clocksource cs;
struct clk *clk;
struct reset_control *rst;
void __iomem *base;
u32 rate;
u32 reload_val;
bool cs_is_valid;
char name[sizeof("jh7110-timer.chX")];
};
> +struct jh7110_timer_priv {
> + struct clk *pclk;
> + struct reset_control *prst;
> + struct jh7110_clkevt clkevt[JH7110_TIMER_CH_MAX];
> +};
> +
> +/* 0:continuous-run mode, 1:single-run mode */
> +enum jh7110_timer_mode {
> + JH7110_TIMER_MODE_CONTIN,
> + JH7110_TIMER_MODE_SINGLE,
> +};
> +
> +/* Interrupt Mask, 0:Unmask, 1:Mask */
> +enum jh7110_timer_int_mask {
> + JH7110_TIMER_INT_ENA,
> + JH7110_TIMER_INT_DIS,
> +};
> +
> +enum jh7110_timer_enable {
> + JH7110_TIMER_DIS,
> + JH7110_TIMER_ENA,
> +};
> +
> +static inline struct jh7110_clkevt *to_jh7110_clkevt(struct clock_event_device *evt)
> +{
> + return container_of(evt, struct jh7110_clkevt, evt);
> +}
> +
> +/*
> + * BIT(0): Read value represent channel int status.
> + * Write 1 to this bit to clear interrupt. Write 0 has no effects.
> + * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
> + */
> +static inline int jh7110_timer_int_clear(struct jh7110_clkevt *clkevt)
> +{
> + u32 value;
> + int ret;
> +
> + /* Waiting interrupt can be cleared */
> + ret = readl_poll_timeout_atomic(clkevt->base + JH7110_TIMER_INT_CLR, value,
> + !(value & JH7110_TIMER_INT_CLR_AVA_MASK),
> + JH7110_DELAY_US, JH7110_TIMEOUT_US);
> + if (!ret)
> + writel(JH7110_TIMER_INT_CLR_ENA, clkevt->base + JH7110_TIMER_INT_CLR);
Below you're calling this function in the interrupt handler and the shutdown
callback, so is it really safe to always enable the interrupt on timeouts?
I think you just want the version below and then let the caller handle
re-enabling the interrupts on errors if needed. (While you're at it you can
remove the inline and let the compiler decide, which is does anyway.)
static int jh7110_timer_int_clear(struct jh7110_clkevt *clkevt)
{
u32 value;
/* Waiting interrupt can be cleared */
return readl_poll_timeout_atomic(clkevt->base + JH7110_TIMER_INT_CLR, value,
!(value & JH7110_TIMER_INT_CLR_AVA_MASK),
JH7110_DELAY_US, JH7110_TIMEOUT_US);
}
> +
> + return ret;
> +}
> +
> +static int jh7110_timer_start(struct jh7110_clkevt *clkevt)
> +{
> + int ret;
> +
> + /* Disable and clear interrupt first */
> + writel(JH7110_TIMER_INT_DIS, clkevt->base + JH7110_TIMER_INT_MASK);
> + ret = jh7110_timer_int_clear(clkevt);
> + if (ret)
> + return ret;
> +
> + writel(JH7110_TIMER_INT_ENA, clkevt->base + JH7110_TIMER_INT_MASK);
> + writel(JH7110_TIMER_ENA, clkevt->base + JH7110_TIMER_ENABLE);
> +
> + return 0;
> +}
> +
> +static int jh7110_timer_shutdown(struct clock_event_device *evt)
> +{
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> + writel(JH7110_TIMER_DIS, clkevt->base + JH7110_TIMER_ENABLE);
> + return jh7110_timer_int_clear(clkevt);
> +}
> +
> +static void jh7110_timer_suspend(struct clock_event_device *evt)
> +{
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> + clkevt->reload_val = readl(clkevt->base + JH7110_TIMER_LOAD);
> + jh7110_timer_shutdown(evt);
> +}
> +
> +static void jh7110_timer_resume(struct clock_event_device *evt)
> +{
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> + writel(clkevt->reload_val, clkevt->base + JH7110_TIMER_LOAD);
> + writel(JH7110_TIMER_RELOAD_VALUE, clkevt->base + JH7110_TIMER_RELOAD);
> + jh7110_timer_start(clkevt);
> +}
> +
> +static int jh7110_timer_tick_resume(struct clock_event_device *evt)
> +{
> + jh7110_timer_resume(evt);
> +
> + return 0;
> +}
Here you probably want it the other way around, so you handle possible errors
from jh7110_timer_start() properly. Eg.
static int jh7110_timer_tick_resume(struct clock_event_device *evt)
{
struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
writel(clkevt->reload_val, clkevt->base + JH7110_TIMER_LOAD);
writel(JH7110_TIMER_RELOAD_VALUE, clkevt->base + JH7110_TIMER_RELOAD);
return jh7110_timer_start(clkevt);
}
static void jh7110_timer_resume(struct clock_event_device *evt)
{
jh7110_timer_tick_resume(evt);
}
> +/* IRQ handler for the timer */
> +static irqreturn_t jh7110_timer_interrupt(int irq, void *priv)
> +{
> + struct clock_event_device *evt = (struct clock_event_device *)priv;
This cast is unnecessary and also calling the variable priv makes you think
it's a struct jh7110_timer_priv, but the interrupt is registered with a
struct clock_event_device pointer.
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
But here you're immediately casting it to a struct jh7110_clkevt pointer. So
why not just register the interrupt with the struct jh7110_clkevt pointer, do
struct jh7110_clkevt *clkevt = data;
> +
> + if (jh7110_timer_int_clear(clkevt))
> + return IRQ_NONE;
> +
> + if (evt->event_handler)
> + evt->event_handler(evt);
..and just use clkevt->evt.event_handler and &clkevt->evt here?
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int jh7110_timer_set_periodic(struct clock_event_device *evt)
> +{
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> + u32 periodic = DIV_ROUND_CLOSEST(clkevt->rate, HZ);
> +
> + writel(JH7110_TIMER_MODE_CONTIN, clkevt->base + JH7110_TIMER_CTL);
> + writel(periodic, clkevt->base + JH7110_TIMER_LOAD);
> +
> + return jh7110_timer_start(clkevt);
> +}
> +
> +static int jh7110_timer_set_oneshot(struct clock_event_device *evt)
> +{
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> + writel(JH7110_TIMER_MODE_SINGLE, clkevt->base + JH7110_TIMER_CTL);
> + writel(JH7110_TIMER_MAX_TICKS, clkevt->base + JH7110_TIMER_LOAD);
> +
> + return jh7110_timer_start(clkevt);
> +}
> +
> +static int jh7110_timer_set_next_event(unsigned long next,
> + struct clock_event_device *evt)
> +{
> + struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> + writel(JH7110_TIMER_MODE_SINGLE, clkevt->base + JH7110_TIMER_CTL);
> + writel(next, clkevt->base + JH7110_TIMER_LOAD);
> +
> + return jh7110_timer_start(clkevt);
> +}
> +
> +static void jh7110_set_clockevent(struct clock_event_device *evt)
> +{
> + evt->features = CLOCK_EVT_FEAT_PERIODIC |
> + CLOCK_EVT_FEAT_ONESHOT |
> + CLOCK_EVT_FEAT_DYNIRQ;
> + evt->set_state_shutdown = jh7110_timer_shutdown;
> + evt->set_state_periodic = jh7110_timer_set_periodic;
> + evt->set_state_oneshot = jh7110_timer_set_oneshot;
> + evt->set_state_oneshot_stopped = jh7110_timer_shutdown;
> + evt->tick_resume = jh7110_timer_tick_resume;
> + evt->set_next_event = jh7110_timer_set_next_event;
> + evt->suspend = jh7110_timer_suspend;
> + evt->resume = jh7110_timer_resume;
> + evt->rating = JH7110_CLOCKEVENT_RATING;
> +}
> +
> +static u64 jh7110_timer_clocksource_read(struct clocksource *cs)
> +{
> + struct jh7110_clkevt *clkevt = container_of(cs, struct jh7110_clkevt, cs);
> +
> + return (u64)readl(clkevt->base + JH7110_TIMER_VALUE);
> +}
> +
> +static int jh7110_clocksource_init(struct jh7110_clkevt *clkevt)
> +{
> + int ret;
> +
> + clkevt->cs.name = clkevt->name;
> + clkevt->cs.rating = JH7110_CLOCK_SOURCE_RATING;
> + clkevt->cs.read = jh7110_timer_clocksource_read;
> + clkevt->cs.mask = CLOCKSOURCE_MASK(JH7110_VALID_BITS);
> + clkevt->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
> +
> + ret = clocksource_register_hz(&clkevt->cs, clkevt->rate);
> + if (ret)
> + return ret;
> +
> + clkevt->cs_is_valid = true; /* clocksource register done */
> + writel(JH7110_TIMER_MODE_CONTIN, clkevt->base + JH7110_TIMER_CTL);
> + writel(JH7110_TIMER_MAX_TICKS, clkevt->base + JH7110_TIMER_LOAD);
> +
> + return jh7110_timer_start(clkevt);
> +}
> +
> +static void jh7110_clockevents_register(struct jh7110_clkevt *clkevt)
> +{
> + clkevt->rate = clk_get_rate(clkevt->clk);
> +
> + jh7110_set_clockevent(&clkevt->evt);
> + clkevt->evt.name = clkevt->name;
> + clkevt->evt.cpumask = cpu_possible_mask;
> +
> + clockevents_config_and_register(&clkevt->evt, clkevt->rate,
> + JH7110_TIMER_MIN_TICKS, JH7110_TIMER_MAX_TICKS);
> +}
> +
> +static void jh7110_timer_release(void *data)
> +{
> + struct jh7110_timer_priv *priv = data;
> + int i;
> +
> + for (i = 0; i < JH7110_TIMER_CH_MAX; i++) {
> + /* Disable each channel of timer */
> + if (priv->clkevt[i].base)
> + writel(JH7110_TIMER_DIS, priv->clkevt[i].base + JH7110_TIMER_ENABLE);
> +
> + /* Avoid no initialization in the loop of the probe */
> + if (!IS_ERR_OR_NULL(priv->clkevt[i].rst))
> + reset_control_assert(priv->clkevt[i].rst);
> +
> + if (priv->clkevt[i].cs_is_valid)
> + clocksource_unregister(&priv->clkevt[i].cs);
> + }
> +
> + reset_control_assert(priv->prst);
> +}
> +
> +static int jh7110_timer_probe(struct platform_device *pdev)
> +{
> + struct jh7110_timer_priv *priv;
> + struct jh7110_clkevt *clkevt;
> + char name[sizeof("chX")];
> + int ch;
> + int ret;
> + void __iomem *base;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return dev_err_probe(&pdev->dev, PTR_ERR(base),
> + "failed to map registers\n");
> +
> + priv->prst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> + if (IS_ERR(priv->prst))
> + return dev_err_probe(&pdev->dev, PTR_ERR(priv->prst),
> + "failed to get apb reset\n");
> +
> + priv->pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> + if (IS_ERR(priv->pclk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(priv->pclk),
> + "failed to get & enable apb clock\n");
priv->pclk is set here, but never read anywhere. Just remove it from the struct
and use a local variable here.
> +
> + ret = reset_control_deassert(priv->prst);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
> +
> + ret = devm_add_action_or_reset(&pdev->dev, jh7110_timer_release, priv);
> + if (ret)
> + return ret;
> +
> + for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
> + clkevt = &priv->clkevt[ch];
> + snprintf(name, sizeof(name), "ch%d", ch);
> +
> + clkevt->base = base + JH7110_TIMER_CH_BASE(ch);
> + /* Ensure timer is disabled */
> + writel(JH7110_TIMER_DIS, clkevt->base + JH7110_TIMER_ENABLE);
> +
> + clkevt->rst = devm_reset_control_get_exclusive(&pdev->dev, name);
> + if (IS_ERR(clkevt->rst))
> + return PTR_ERR(clkevt->rst);
> +
> + clkevt->clk = devm_clk_get_enabled(&pdev->dev, name);
> + if (IS_ERR(clkevt->clk))
> + return PTR_ERR(clkevt->clk);
> +
> + ret = reset_control_deassert(clkevt->rst);
> + if (ret)
> + return ret;
> +
> + clkevt->evt.irq = platform_get_irq(pdev, ch);
> + if (clkevt->evt.irq < 0)
> + return clkevt->evt.irq;
> +
> + snprintf(clkevt->name, sizeof(clkevt->name), "jh7110-timer.ch%d", ch);
> + jh7110_clockevents_register(clkevt);
> +
> + ret = devm_request_irq(&pdev->dev, clkevt->evt.irq, jh7110_timer_interrupt,
> + IRQF_TIMER | IRQF_IRQPOLL,
> + clkevt->name, &clkevt->evt);
> + if (ret)
> + return ret;
> +
> + ret = jh7110_clocksource_init(clkevt);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id jh7110_timer_match[] = {
> + { .compatible = "starfive,jh7110-timer", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
> +
> +static struct platform_driver jh7110_timer_driver = {
> + .probe = jh7110_timer_probe,
> + .driver = {
> + .name = "jh7110-timer",
> + .of_match_table = jh7110_timer_match,
> + },
> +};
> +module_platform_driver(jh7110_timer_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu at starfivetech.com>");
> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
More information about the linux-riscv
mailing list