[PATCH v2 1/3] dt-bindings: phy: Add StarFive JH7110 USB dt-binding

Minda Chen minda.chen at starfivetech.com
Wed Mar 8 19:45:29 PST 2023



On 2023/3/8 22:06, Rob Herring wrote:
> 
> On Wed, 08 Mar 2023 16:27:58 +0800, Minda Chen wrote:
>> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
>> USB controller is cadence USB 3.0 IP.
>> 
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> ---
>>  .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++
>>  1 file changed, 158 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>> 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb at 10100000: phy-names:1: 'anyOf' conditional failed, one must be fixed:
> 	'cdns3,usb2-phy' was expected
> 	'cdns3,usb3-phy' was expected
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dtb: usb at 10100000: 'phys' is a dependency of 'phy-names'
> 	From schema: /usr/local/lib/python3.10/dist-packages/dtschema/schemas/phy/phy-consumer.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230308082800.3008-2-minda.chen@starfivetech.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 
I am sorry about this, I just run dtbs_check, not dt_binding_check. Next version I will fix it. 



More information about the linux-riscv mailing list