[PATCH v2 1/3] dt-bindings: phy: Add StarFive JH7110 USB dt-binding

[Rob Herring]

On Wed, Mar 08, 2023 at 04:27:58PM +0800, Minda Chen wrote:
> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
> USB controller is cadence USB 3.0 IP.
> 
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> ---
>  .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++
>  1 file changed, 158 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
> new file mode 100644
> index 000000000000..daa88d065deb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml

Filename should match the compatible. The filename seems more correct 
than the compatible...

> @@ -0,0 +1,158 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive USB 2.0 and 3.0 PHY
> +
> +maintainers:
> +  - Minda Chen<minda.chen at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: starfive,jh7110-usb

What's the USB controller called?

> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: usb3
> +      - const: usb2
> +
> +  clocks:
> +    items:
> +      - description: usb 125m clock
> +      - description: app 125m clock
> +      - description: lpm clock
> +      - description: stb clock
> +      - description: apb clock
> +      - description: axi clock
> +      - description: utmi apb clock
> +
> +  clock-names:
> +    items:
> +      - const: usb_125m
> +      - const: usb0_app_125
> +      - const: usb0_lpm
> +      - const: usb0_stb
> +      - const: usb0_apb
> +      - const: usb0_axi
> +      - const: usb0_utmi_apb

usb_ and usb0_ is redundant, drop.

> +
> +  resets:
> +    items:
> +      - description: USB0_PWRUP reset
> +      - description: USB0_APB reset
> +      - description: USB0_AXI reset
> +      - description: USB0_UTMI_APB reset
> +
> +  starfive,sys-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:

Are there multiple entries of phandle+offset because this says there 
are. You want '- items:' here to limit it to 1 phandle+offset.

> +        - description: phandle to System Register Controller sys_syscon node.
> +        - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB.
> +    description:
> +      The phandle to System Register Controller syscon node and the offset
> +      of SYS_SYSCONSAIF__SYSCFG register for USB.
> +
> +  starfive,stg-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:

Same here.

> +        - description: phandle to System Register Controller stg_syscon node.
> +        - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB.
> +        - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB.
> +        - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB.
> +        - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB.
> +    description:
> +      The phandle to System Register Controller syscon node and the offset
> +      of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset
> +      for USB.
> +
> +  dr_mode:

Usually this belongs in the controller node.

> +    description: PHY mode.
> +    enum:
> +      - host
> +      - peripheral
> +      - otg
> +
> +  "#address-cells":
> +    maximum: 2
> +
> +  "#size-cells":
> +    maximum: 2
> +
> +  ranges: true
> +
> +  starfive,usb2-only:
> +    type: boolean
> +    description: Set USB using usb 2.0 phy. Supprt USB 2.0 only

The 'maximum-speed' property in the controller should be enough. Why is 
this needed.

Being a PHY, you are missing #phy-cells.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - starfive,sys-syscon
> +  - starfive,stg-syscon
> +  - dr_mode
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +patternProperties:
> +  "^usb@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      usbphy node should have '1' usb controller subnode.
> +      It could be Cadence USB3 DRD controller.
> +      Cadence USB3 should follow the bindings specified in
> +      Documentation/devicetree/bindings/usb/cdns,usb3.yaml

Why is the controller a child of the phy?

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    usbphy at 10200000 {
> +      compatible = "starfive,jh7110-usb";
> +      reg = <0x10210000 0x1000>,
> +            <0x10200000 0x1000>;
> +      reg-names = "usb3", "usb2";
> +      clocks = <&syscrg 95>,
> +               <&stgcrg 6>,
> +               <&stgcrg 4>,
> +               <&stgcrg 5>,
> +               <&stgcrg 1>,
> +               <&stgcrg 3>,
> +               <&stgcrg 2>;
> +      clock-names = "usb_125m", "usb0_app_125", "usb0_lpm",
> +                    "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb";
> +      resets = <&stgcrg 10>,
> +               <&stgcrg 8>,
> +               <&stgcrg 7>,
> +               <&stgcrg 9>;
> +      starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>;
> +      starfive,sys-syscon = <&sys_syscon 0x18>;
> +      dr_mode = "host";
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges;
> +
> +      usb at 10100000 {
> +        compatible = "cdns,usb3";

This needs a platform specific compatible.

> +        reg = <0x10100000 0x10000>,
> +              <0x10110000 0x10000>,
> +              <0x10120000 0x10000>;
> +        reg-names = "otg", "xhci", "dev";
> +        interrupts = <100>, <108>, <110>;
> +        interrupt-names = "host", "peripheral", "otg";
> +        phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy";
> +        maximum-speed = "super-speed";
> +      };
> +    };
> -- 
> 2.17.1
>