[PATCH v5 12/12] riscv: dts: starfive: visionfive 2: Enable gmac device tree node

[Emil Renner Berthing]

On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo at starfivetech.com> wrote:
> From: Yanhong Wang <yanhong.wang at starfivetech.com>
>
> Update gmac device tree node status to okay.
>
> Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
> Signed-off-by: Samin Guo <samin.guo at starfivetech.com>
> ---
>  .../dts/starfive/jh7110-starfive-visionfive-2.dtsi     | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index c2aa8946a0f1..d1c409f40014 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -12,6 +12,8 @@
>  / {
>         aliases {
>                 serial0 = &uart0;
> +               ethernet0 = &gmac0;
> +               ethernet1 = &gmac1;

Please sort these alphabetically.

>                 i2c0 = &i2c0;
>                 i2c2 = &i2c2;
>                 i2c5 = &i2c5;
> @@ -92,6 +94,14 @@
>         status = "okay";
>  };
>
> +&gmac0 {
> +       status = "okay";
> +};
> +
> +&gmac1 {
> +       status = "okay";
> +};

Since you'll need to add to the gmac0 and gmac1 nodes in the board
specific files too and it's only one line, consider just dropping this
here and add the status = "okay" there instead.

>  &i2c0 {
>         clock-frequency = <100000>;
>         i2c-sda-hold-time-ns = <300>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv