[PATCH V1 3/3] Revert "riscv: Use PUD/P4D/PGD pages for the linear mapping"
Song Shuai
suagrfillet at gmail.com
Sun Jun 25 08:28:41 PDT 2023
From: Song Shuai <songshuaishuai at tinylab.org>
This reverts commit 3335068f87217ea59d08f462187dc856652eea15.
This commit maps the PMP regions from some versions of OpenSbi in
the linear mapping, that will lead to an access fault when doing
hibernation[1] or some speculative accesses.
The best_map_size() function from this commit doesn't check the
virtual alignment before choosing a map size, that will cause a
page fault[2]. We can let best_map_size() take the VA into
consideration via commit 49a0a3731596 ("riscv: Check the virtual
alignment before choosing a map size"), but that commit slows down
the boot time and consumes some system memory when UEFI booting.
This commit uses PUD/P4D/PGD pages for the linear mapping to improve
the performance is marginal from a recent talk [3] from Mike Rapoport.
OpenSbi had marked all the PMP-protected regions as "no-map" [4]
to practice this talk.
For all those reasons, let's revert this commit.
[1] https://lore.kernel.org/linux-riscv/CAAYs2=gQvkhTeioMmqRDVGjdtNF_vhB+vm_1dHJxPNi75YDQ_Q@mail.gmail.com/
[2] https://lore.kernel.org/linux-riscv/tencent_7C3B580B47C1B17C16488EC1@qq.com/
[3] https://lwn.net/Articles/931406/
[4] https://github.com/riscv-software-src/opensbi/commit/8153b2622b08802cc542f30a1fcba407a5667ab9
Signed-off-by: Song Shuai <songshuaishuai at tinylab.org>
---
arch/riscv/include/asm/page.h | 16 ---------------
arch/riscv/mm/init.c | 38 ++++++-----------------------------
arch/riscv/mm/physaddr.c | 16 ---------------
drivers/of/fdt.c | 11 +++++-----
4 files changed, 11 insertions(+), 70 deletions(-)
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index b55ba20903ec..21b346ab81c2 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -89,14 +89,6 @@ typedef struct page *pgtable_t;
#define PTE_FMT "%08lx"
#endif
-#ifdef CONFIG_64BIT
-/*
- * We override this value as its generic definition uses __pa too early in
- * the boot process (before kernel_map.va_pa_offset is set).
- */
-#define MIN_MEMBLOCK_ADDR 0
-#endif
-
#ifdef CONFIG_MMU
#define ARCH_PFN_OFFSET (PFN_DOWN((unsigned long)phys_ram_base))
#else
@@ -128,11 +120,7 @@ extern phys_addr_t phys_ram_base;
#define is_linear_mapping(x) \
((x) >= PAGE_OFFSET && (!IS_ENABLED(CONFIG_64BIT) || (x) < PAGE_OFFSET + KERN_VIRT_SIZE))
-#ifndef CONFIG_DEBUG_VIRTUAL
#define linear_mapping_pa_to_va(x) ((void *)((unsigned long)(x) + kernel_map.va_pa_offset))
-#else
-void *linear_mapping_pa_to_va(unsigned long x);
-#endif
#define kernel_mapping_pa_to_va(y) ({ \
unsigned long _y = (unsigned long)(y); \
(IS_ENABLED(CONFIG_XIP_KERNEL) && _y < phys_ram_base) ? \
@@ -141,11 +129,7 @@ void *linear_mapping_pa_to_va(unsigned long x);
})
#define __pa_to_va_nodebug(x) linear_mapping_pa_to_va(x)
-#ifndef CONFIG_DEBUG_VIRTUAL
#define linear_mapping_va_to_pa(x) ((unsigned long)(x) - kernel_map.va_pa_offset)
-#else
-phys_addr_t linear_mapping_va_to_pa(unsigned long x);
-#endif
#define kernel_mapping_va_to_pa(y) ({ \
unsigned long _y = (unsigned long)(y); \
(IS_ENABLED(CONFIG_XIP_KERNEL) && _y < kernel_map.virt_addr + XIP_OFFSET) ? \
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 38c4b4d6b64f..4561781bcf60 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -216,14 +216,6 @@ static void __init setup_bootmem(void)
phys_ram_end = memblock_end_of_DRAM();
if (!IS_ENABLED(CONFIG_XIP_KERNEL))
phys_ram_base = memblock_start_of_DRAM();
-
- /*
- * In 64-bit, any use of __va/__pa before this point is wrong as we
- * did not know the start of DRAM before.
- */
- if (IS_ENABLED(CONFIG_64BIT))
- kernel_map.va_pa_offset = PAGE_OFFSET - phys_ram_base;
-
/*
* memblock allocator is not aware of the fact that last 4K bytes of
* the addressable memory can not be mapped because of IS_ERR_VALUE
@@ -662,16 +654,9 @@ void __init create_pgd_mapping(pgd_t *pgdp,
static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
{
- if (!(base & (PGDIR_SIZE - 1)) && size >= PGDIR_SIZE)
- return PGDIR_SIZE;
-
- if (!(base & (P4D_SIZE - 1)) && size >= P4D_SIZE)
- return P4D_SIZE;
-
- if (!(base & (PUD_SIZE - 1)) && size >= PUD_SIZE)
- return PUD_SIZE;
-
- if (!(base & (PMD_SIZE - 1)) && size >= PMD_SIZE)
+ /* Upgrade to PMD_SIZE mappings whenever possible */
+ base &= PMD_SIZE - 1;
+ if (!base && size >= PMD_SIZE)
return PMD_SIZE;
return PAGE_SIZE;
@@ -1037,22 +1022,11 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
set_satp_mode(dtb_pa);
#endif
- /*
- * In 64-bit, we defer the setup of va_pa_offset to setup_bootmem,
- * where we have the system memory layout: this allows us to align
- * the physical and virtual mappings and then make use of PUD/P4D/PGD
- * for the linear mapping. This is only possible because the kernel
- * mapping lies outside the linear mapping.
- * In 32-bit however, as the kernel resides in the linear mapping,
- * setup_vm_final can not change the mapping established here,
- * otherwise the same kernel addresses would get mapped to different
- * physical addresses (if the start of dram is different from the
- * kernel physical address start).
- */
- kernel_map.va_pa_offset = IS_ENABLED(CONFIG_64BIT) ?
- 0UL : PAGE_OFFSET - kernel_map.phys_addr;
+ kernel_map.va_pa_offset = PAGE_OFFSET - kernel_map.phys_addr;
kernel_map.va_kernel_pa_offset = kernel_map.virt_addr - kernel_map.phys_addr;
+ phys_ram_base = kernel_map.phys_addr;
+
/*
* The default maximal physical memory size is KERN_VIRT_SIZE for 32-bit
* kernel, whereas for 64-bit kernel, the end of the virtual address
diff --git a/arch/riscv/mm/physaddr.c b/arch/riscv/mm/physaddr.c
index 18706f457da7..9b18bda74154 100644
--- a/arch/riscv/mm/physaddr.c
+++ b/arch/riscv/mm/physaddr.c
@@ -33,19 +33,3 @@ phys_addr_t __phys_addr_symbol(unsigned long x)
return __va_to_pa_nodebug(x);
}
EXPORT_SYMBOL(__phys_addr_symbol);
-
-phys_addr_t linear_mapping_va_to_pa(unsigned long x)
-{
- BUG_ON(!kernel_map.va_pa_offset);
-
- return ((unsigned long)(x) - kernel_map.va_pa_offset);
-}
-EXPORT_SYMBOL(linear_mapping_va_to_pa);
-
-void *linear_mapping_pa_to_va(unsigned long x)
-{
- BUG_ON(!kernel_map.va_pa_offset);
-
- return ((void *)((unsigned long)(x) + kernel_map.va_pa_offset));
-}
-EXPORT_SYMBOL(linear_mapping_pa_to_va);
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index bf502ba8da95..c28aedd7ae1f 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -888,13 +888,12 @@ const void * __init of_flat_dt_match_machine(const void *default_match,
static void __early_init_dt_declare_initrd(unsigned long start,
unsigned long end)
{
- /*
- * __va() is not yet available this early on some platforms. In that
- * case, the platform uses phys_initrd_start/phys_initrd_size instead
- * and does the VA conversion itself.
+ /* ARM64 would cause a BUG to occur here when CONFIG_DEBUG_VM is
+ * enabled since __va() is called too early. ARM64 does make use
+ * of phys_initrd_start/phys_initrd_size so we can skip this
+ * conversion.
*/
- if (!IS_ENABLED(CONFIG_ARM64) &&
- !(IS_ENABLED(CONFIG_RISCV) && IS_ENABLED(CONFIG_64BIT))) {
+ if (!IS_ENABLED(CONFIG_ARM64)) {
initrd_start = (unsigned long)__va(start);
initrd_end = (unsigned long)__va(end);
initrd_below_start_ok = 1;
--
2.20.1
More information about the linux-riscv
mailing list