[PATCH v3 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC

[William Qiu]

On 2023/6/19 17:16, Rob Herring wrote:
> 
> On Mon, 19 Jun 2023 16:35:15 +0800, William Qiu wrote:
>> The QSPI controller needs three clock items to work properly on StarFive
>> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
>> platforms do not have this constraint.
>> 
>> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
>> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>> ---
>>  .../bindings/spi/cdns,qspi-nor.yaml           | 20 ++++++++++++++++++-
>>  1 file changed, 19 insertions(+), 1 deletion(-)
>> 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,qspi-nor.example.dtb: spi at ff705000: clocks: [[4294967295]] is too short
> 	from schema $id: http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230619083517.415597-2-william.qiu@starfivetech.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 
It seems that my changes are not compatible with other dts files, I'll try to
fix it.

Thanks for reminding.

Best regards
William