[PATCH v3 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC

[Krzysztof Kozlowski]

On 19/06/2023 10:35, William Qiu wrote:
> The QSPI controller needs three clock items to work properly on StarFive
> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
> platforms do not have this constraint.
> 
> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> ---
>  .../bindings/spi/cdns,qspi-nor.yaml           | 20 ++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> index b310069762dd..1b83cbb9a086 100644
> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> @@ -26,6 +26,15 @@ allOf:
>              const: starfive,jh7110-qspi
>      then:
>        properties:
> +        clocks:
> +          maxItems: 3
> +
> +        clock-names:
> +          items:
> +            - const: ref
> +            - const: ahb
> +            - const: apb

You are duplicating top-level property. Define the items only in one
place. If this list is applicable to everything, then in top-level property.

> +
>          resets:
>            minItems: 2
>            maxItems: 3
> @@ -38,6 +47,9 @@ allOf:
>  
>      else:
>        properties:
> +        clocks:
> +          maxItems: 1

clock-names is missing. They must be in sync with clocks. What is the
first clock?

> +
>          resets:
>            maxItems: 2
>  
> @@ -70,7 +82,13 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    maxItems: 1
> +    maxItems: 3


You did not test it before sending. minItems is missing.

> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: ahb
> +      - const: apb


>  
>    cdns,fifo-depth:
>      description:

Best regards,
Krzysztof