[PATCH v7 2/4] riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock

Damian Tometzki damian at riscv-rocks.de
Tue Dec 5 07:52:05 PST 2023


On Tue, 05. Dec 06:48, Emil Renner Berthing wrote:
> Jisheng Zhang wrote:
> > On Mon, Dec 04, 2023 at 01:47:45AM -0800, Emil Renner Berthing wrote:
> > > Drew Fustini wrote:
> > > > Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> > > > controller instance which is typically connected to the eMMC device.
> > > > Add mmc1 node for the second mmc controller instance which is typically
> > > > connected to microSD slot.
> > > >
> > > > Signed-off-by: Drew Fustini <dfustini at baylibre.com>
> > > > ---
> > > >  arch/riscv/boot/dts/thead/th1520.dtsi | 25 +++++++++++++++++++++++++
> > > >  1 file changed, 25 insertions(+)
> > > >
> > > > diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> > > > index ba4d2c673ac8..af4fdcd82e0b 100644
> > > > --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> > > > +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> > > > @@ -146,6 +146,13 @@ uart_sclk: uart-sclk-clock {
> > > >  		#clock-cells = <0>;
> > > >  	};
> > > >
> > > > +	sdhci_clk: sdhci-clock {
> > > > +		compatible = "fixed-clock";
> > > > +		clock-frequency = <198000000>;
> > > > +		clock-output-names = "sdhci_clk";
> > > > +		#clock-cells = <0>;
> > > > +	};
> > > > +
> > > >  	soc {
> > > >  		compatible = "simple-bus";
> > > >  		interrupt-parent = <&plic>;
> > > > @@ -304,6 +311,24 @@ dmac0: dma-controller at ffefc00000 {
> > > >  			status = "disabled";
> > > >  		};
> > > >
> > > > +		mmc0: mmc at ffe7080000 {
> > > > +			compatible = "thead,th1520-dwcmshc";
> > > > +			reg = <0xff 0xe7080000 0x0 0x10000>;
> > > > +			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> > > > +			clocks = <&sdhci_clk>;
> > > > +			clock-names = "core";
> > > > +			status = "disabled";
> > > > +		};
> > > > +
> > > > +		mmc1: mmc at ffe7090000 {
> > > > +			compatible = "thead,th1520-dwcmshc";
> > > > +			reg = <0xff 0xe7090000 0x0 0x10000>;
> > > > +			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
> > > > +			clocks = <&sdhci_clk>;
> > > > +			clock-names = "core";
> > > > +			status = "disabled";
> > > > +		};
> > > > +
> > >
> > > Hi Drew,
> > >
> > > This doesn't seem to match the documentation shared here:
> > > https://lore.kernel.org/linux-riscv/5f437109d2be2b8843f549a661054a2e3ec0d66e.camel@xry111.site/
> > > From the TH1520 System User Manual.pdf in there, I'd expect something like
> >
> > >
> > > 	emmc: mmc at ffe7080000 {
> > > 		compatible = "thead,th1520-dwcmshc";
> > > 		reg = <0xff 0xe7080000 0x0 0x10000>;
> > > 		...
> > > 	};
> >
> > Hi Emil,
> >
> > I think this isn't necessary. From other soc dts files, I see such
> > naming, but lots socs just use mmc0, mmc1, and so on.
> 
> No it certainly isn't necessary. Those labels are purely for us humans to read
> and are not present in the dtb. But that's exactly why I think it'd be a good
> idea match the labels with the documentation, so it will easier for us humans
> to match up the device tree source to documentation.
Hello together,

yes i agree to this too. It is easier for troubleshooting etc. 

Damian

> 
> > And IIRC, the host for sd and sdio can support both, IOW, below
> > sdio0/sdio1 may be used for sdcard.
> 
> Yes, all of the EMMC, SDIO0 and SDIO1 seem to be instances of the same IP.
> 
> /Emil



More information about the linux-riscv mailing list