[PATCH v5 0/2] Change the sg2042 timer layout to fit aclint format

Inochi Amaoto inochiama at outlook.com
Mon Dec 4 01:49:52 PST 2023


As the sg2042 uses different address for timer and mswi of its clint
device, it should follow the aclint format. For the previous patchs,
it only use only one address for both mtime and mtimer, this is can
not be parsed by OpenSBI. To resolve this, separate these two registers
in the dtb.

Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005693.html
Link: https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc

This patch can be tested with upstream SBI with the following patch:
1. https://lists.infradead.org/pipermail/opensbi/2023-November/005926.html

Changed from v4:
1. left T-HEAD aclint register in the bindings only.
2. improve the bindings commit message.

Changed from v3:
1. add all register in the bindings

Changed from v2:
1. Use reg-names to map the registers.

Changed from v1:
1. change the commit to address the reason for ABI change.
2. remove unnecessary link in the commit.

Inochi Amaoto (2):
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and
    mtimecmp regs
  riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint
    format

 .../timer/thead,c900-aclint-mtimer.yaml       |  9 ++-
 arch/riscv/boot/dts/sophgo/sg2042.dtsi        | 80 +++++++++++--------
 2 files changed, 56 insertions(+), 33 deletions(-)

--
2.43.0




More information about the linux-riscv mailing list