[PATCH v7 2/4] riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock

[Jisheng Zhang]

On Mon, Dec 04, 2023 at 01:47:45AM -0800, Emil Renner Berthing wrote:
> Drew Fustini wrote:
> > Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> > controller instance which is typically connected to the eMMC device.
> > Add mmc1 node for the second mmc controller instance which is typically
> > connected to microSD slot.
> >
> > Signed-off-by: Drew Fustini <dfustini at baylibre.com>
> > ---
> >  arch/riscv/boot/dts/thead/th1520.dtsi | 25 +++++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> > index ba4d2c673ac8..af4fdcd82e0b 100644
> > --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> > +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> > @@ -146,6 +146,13 @@ uart_sclk: uart-sclk-clock {
> >  		#clock-cells = <0>;
> >  	};
> >
> > +	sdhci_clk: sdhci-clock {
> > +		compatible = "fixed-clock";
> > +		clock-frequency = <198000000>;
> > +		clock-output-names = "sdhci_clk";
> > +		#clock-cells = <0>;
> > +	};
> > +
> >  	soc {
> >  		compatible = "simple-bus";
> >  		interrupt-parent = <&plic>;
> > @@ -304,6 +311,24 @@ dmac0: dma-controller at ffefc00000 {
> >  			status = "disabled";
> >  		};
> >
> > +		mmc0: mmc at ffe7080000 {
> > +			compatible = "thead,th1520-dwcmshc";
> > +			reg = <0xff 0xe7080000 0x0 0x10000>;
> > +			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&sdhci_clk>;
> > +			clock-names = "core";
> > +			status = "disabled";
> > +		};
> > +
> > +		mmc1: mmc at ffe7090000 {
> > +			compatible = "thead,th1520-dwcmshc";
> > +			reg = <0xff 0xe7090000 0x0 0x10000>;
> > +			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&sdhci_clk>;
> > +			clock-names = "core";
> > +			status = "disabled";
> > +		};
> > +
> 
> Hi Drew,
> 
> This doesn't seem to match the documentation shared here:
> https://lore.kernel.org/linux-riscv/5f437109d2be2b8843f549a661054a2e3ec0d66e.camel@xry111.site/
> From the TH1520 System User Manual.pdf in there, I'd expect something like

> 
> 	emmc: mmc at ffe7080000 {
> 		compatible = "thead,th1520-dwcmshc";
> 		reg = <0xff 0xe7080000 0x0 0x10000>;
> 		...
> 	};

Hi Emil,

I think this isn't necessary. From other soc dts files, I see such
naming, but lots socs just use mmc0, mmc1, and so on.

And IIRC, the host for sd and sdio can support both, IOW, below
sdio0/sdio1 may be used for sdcard.

Thanks
> 
> 	sdio0: mmc at ffe7090000 {
> 		compatible = "thead,th1520-dwcmshc";
> 		reg = <0xff 0xe7090000 0x0 0x10000>;
> 		...
> 	};
> 
> 	sdio1: mmc at ffe70a0000 {
> 		compatible = "thead,th1520-dwcmshc";
> 		reg = <0xff 0xe70a0000 0x0 0x10000>;
> 		...
> 	};
> 
> /Emil