[PATCH v7 2/4] riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock

[Emil Renner Berthing]

Drew Fustini wrote:
> Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> controller instance which is typically connected to the eMMC device.
> Add mmc1 node for the second mmc controller instance which is typically
> connected to microSD slot.
>
> Signed-off-by: Drew Fustini <dfustini at baylibre.com>
> ---
>  arch/riscv/boot/dts/thead/th1520.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index ba4d2c673ac8..af4fdcd82e0b 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -146,6 +146,13 @@ uart_sclk: uart-sclk-clock {
>  		#clock-cells = <0>;
>  	};
>
> +	sdhci_clk: sdhci-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <198000000>;
> +		clock-output-names = "sdhci_clk";
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&plic>;
> @@ -304,6 +311,24 @@ dmac0: dma-controller at ffefc00000 {
>  			status = "disabled";
>  		};
>
> +		mmc0: mmc at ffe7080000 {
> +			compatible = "thead,th1520-dwcmshc";
> +			reg = <0xff 0xe7080000 0x0 0x10000>;
> +			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&sdhci_clk>;
> +			clock-names = "core";
> +			status = "disabled";
> +		};
> +
> +		mmc1: mmc at ffe7090000 {
> +			compatible = "thead,th1520-dwcmshc";
> +			reg = <0xff 0xe7090000 0x0 0x10000>;
> +			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&sdhci_clk>;
> +			clock-names = "core";
> +			status = "disabled";
> +		};
> +

Hi Drew,

This doesn't seem to match the documentation shared here:
https://lore.kernel.org/linux-riscv/5f437109d2be2b8843f549a661054a2e3ec0d66e.camel@xry111.site/
>From the TH1520 System User Manual.pdf in there, I'd expect something like

	emmc: mmc at ffe7080000 {
		compatible = "thead,th1520-dwcmshc";
		reg = <0xff 0xe7080000 0x0 0x10000>;
		...
	};

	sdio0: mmc at ffe7090000 {
		compatible = "thead,th1520-dwcmshc";
		reg = <0xff 0xe7090000 0x0 0x10000>;
		...
	};

	sdio1: mmc at ffe70a0000 {
		compatible = "thead,th1520-dwcmshc";
		reg = <0xff 0xe70a0000 0x0 0x10000>;
		...
	};

/Emil