[PATCH v1 30/30] RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options
Hal Feng
hal.feng at linux.starfivetech.com
Fri Sep 30 05:23:18 PDT 2022
Add Kconfig options to select the specified StarFive SoC. Select
necessary Kconfig options required by the specified SoC for booting.
Signed-off-by: Hal Feng <hal.feng at linux.starfivetech.com>
---
arch/riscv/Kconfig.socs | 27 ++++++++++++++++++++++++++-
arch/riscv/boot/dts/starfive/Makefile | 4 ++--
drivers/clk/starfive/Kconfig | 14 ++++++--------
drivers/pinctrl/starfive/Kconfig | 6 ++----
drivers/reset/Kconfig | 1 -
5 files changed, 36 insertions(+), 16 deletions(-)
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 10f68a4359f9..321c448e7b6f 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -22,10 +22,35 @@ config SOC_STARFIVE
bool "StarFive SoCs"
select PINCTRL
select RESET_CONTROLLER
+ select RESET_STARFIVE
+ help
+ This enables support for StarFive SoC platform hardware.
+
+if SOC_STARFIVE
+
+config SOC_JH7100
+ bool "StarFive JH7100 SoC support"
+ depends on SOC_STARFIVE
select SIFIVE_L2
select SIFIVE_PLIC
+ select CLK_STARFIVE_JH7100
+ select PINCTRL_STARFIVE_JH7100
+ default SOC_STARFIVE
help
- This enables support for StarFive SoC platform hardware.
+ This enables support for StarFive JH7100 SoC.
+
+config SOC_JH7110
+ bool "StarFive JH7110 SoC support"
+ depends on SOC_STARFIVE
+ select SIFIVE_L2
+ select SIFIVE_PLIC
+ select CLK_STARFIVE_JH7110_SYS
+ select PINCTRL_STARFIVE_JH7110
+ default SOC_STARFIVE
+ help
+ This enables support for StarFive JH7110 SoC.
+
+endif
config SOC_VIRT
bool "QEMU Virt Machine"
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index e1237dbc6aac..a6ecd3c2ec7d 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
-dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-v2.dtb
+dtb-$(CONFIG_SOC_JH7100) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_SOC_JH7110) += jh7110-starfive-visionfive-v2.dtb
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 42aad3b553cb..d0490e9f42db 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -5,36 +5,34 @@ config CLK_STARFIVE
config CLK_STARFIVE_JH7100
bool "StarFive JH7100 clock support"
- depends on SOC_STARFIVE || COMPILE_TEST
+ depends on SOC_JH7100 || COMPILE_TEST
select CLK_STARFIVE
- default SOC_STARFIVE
help
Say yes here to support the clock controller on the StarFive JH7100
SoC.
config CLK_STARFIVE_JH7100_AUDIO
tristate "StarFive JH7100 audio clock support"
- depends on SOC_STARFIVE || COMPILE_TEST
+ depends on SOC_JH7100 || COMPILE_TEST
select CLK_STARFIVE
- default m if SOC_STARFIVE
+ default m if SOC_JH7100
help
Say Y or M here to support the audio clocks on the StarFive JH7100
SoC.
config CLK_STARFIVE_JH7110_SYS
bool "StarFive JH7110 system clock support"
- depends on SOC_STARFIVE || COMPILE_TEST
+ depends on SOC_JH7110 || COMPILE_TEST
select CLK_STARFIVE
- default SOC_STARFIVE
help
Say yes here to support the system clock controller on the
StarFive JH7110 SoC.
config CLK_STARFIVE_JH7110_AON
tristate "StarFive JH7110 always-on clock support"
- depends on SOC_STARFIVE || COMPILE_TEST
+ depends on SOC_JH7110 || COMPILE_TEST
select CLK_STARFIVE
- default m if SOC_STARFIVE
+ default m if SOC_JH7110
help
Say yes here to support the always-on clock controller on the
StarFive JH7110 SoC.
diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
index fde39f4a7922..d09bdf6d3029 100644
--- a/drivers/pinctrl/starfive/Kconfig
+++ b/drivers/pinctrl/starfive/Kconfig
@@ -2,7 +2,7 @@
config PINCTRL_STARFIVE_JH7100
tristate "Pinctrl and GPIO driver for the StarFive JH7100 SoC"
- depends on SOC_STARFIVE || COMPILE_TEST
+ depends on SOC_JH7100 || COMPILE_TEST
depends on OF
select GENERIC_PINCTRL_GROUPS
select GENERIC_PINMUX_FUNCTIONS
@@ -10,7 +10,6 @@ config PINCTRL_STARFIVE_JH7100
select GPIOLIB
select GPIOLIB_IRQCHIP
select OF_GPIO
- default SOC_STARFIVE
help
Say yes here to support pin control on the StarFive JH7100 SoC.
This also provides an interface to the GPIO pins not used by other
@@ -28,10 +27,9 @@ config PINCTRL_STARFIVE
config PINCTRL_STARFIVE_JH7110
bool "Pinctrl and GPIO driver for the StarFive JH7110 SoC"
- depends on SOC_STARFIVE || COMPILE_TEST
+ depends on SOC_JH7110 || COMPILE_TEST
depends on OF
select PINCTRL_STARFIVE
- default SOC_STARFIVE
help
Say yes here to support pin control on the StarFive JH7110 SoC.
This also provides an interface to the GPIO pins not used by other
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 8121de5ecc3c..c001879bd890 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -228,7 +228,6 @@ config RESET_SOCFPGA
config RESET_STARFIVE
bool "StarFive SoC Reset Driver"
depends on SOC_STARFIVE || COMPILE_TEST
- default SOC_STARFIVE
help
This enables the reset controller driver for the StarFive SoCs.
--
2.17.1
More information about the linux-riscv
mailing list