[PATCH v3 2/2] RISC-V: Clean up the Zicbom block size probing
Andrew Jones
ajones at ventanamicro.com
Tue Sep 6 00:45:09 PDT 2022
From: Palmer Dabbelt <palmer at rivosinc.com>
This fixes two issues: I truncated the warning's hart ID when porting to
the 64-bit hart ID code, and the original code's warning handling could
fire on an uninitialized hart ID.
The biggest change here is that riscv_cbom_block_size is no longer
initialized, as IMO the default isn't sane: there's nothing in the ISA
that mandates any specific cache block size, so falling back to one will
just silently produce the wrong answer on some systems. This also
changes the probing order so the cache block size is known before
enabling Zicbom support.
Fixes: 3aefb2ee5bdd ("riscv: implement Zicbom-based CMO instructions + the t-head variant")
Fixes: 1631ba1259d6 ("riscv: Add support for non-coherent devices using zicbom extension")
Reported-by: kernel test robot <lkp at intel.com>
Signed-off-by: Palmer Dabbelt <palmer at rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
[Rebased on Anup's move patch and applied Conor Dooley's and Heiko
Stuebner's changes.]
Signed-off-by: Andrew Jones <ajones at ventanamicro.com>
---
arch/riscv/errata/thead/errata.c | 1 +
arch/riscv/kernel/setup.c | 2 +-
arch/riscv/mm/cacheflush.c | 21 +++++++++++----------
arch/riscv/mm/dma-noncoherent.c | 2 ++
4 files changed, 15 insertions(+), 11 deletions(-)
diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
index 202c83f677b2..96648c176f37 100644
--- a/arch/riscv/errata/thead/errata.c
+++ b/arch/riscv/errata/thead/errata.c
@@ -37,6 +37,7 @@ static bool errata_probe_cmo(unsigned int stage,
if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
return false;
+ riscv_cbom_block_size = L1_CACHE_BYTES;
riscv_noncoherent_supported();
return true;
#else
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 95ef6e2bf45c..2dfc463b86bb 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -296,8 +296,8 @@ void __init setup_arch(char **cmdline_p)
setup_smp();
#endif
- riscv_fill_hwcap();
riscv_init_cbom_blocksize();
+ riscv_fill_hwcap();
apply_boot_alternatives();
}
diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index 336c5deea870..e5b087be1577 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -89,39 +89,40 @@ void flush_icache_pte(pte_t pte)
}
#endif /* CONFIG_MMU */
-unsigned int riscv_cbom_block_size = L1_CACHE_BYTES;
+unsigned int riscv_cbom_block_size;
#ifdef CONFIG_RISCV_ISA_ZICBOM
void riscv_init_cbom_blocksize(void)
{
struct device_node *node;
+ unsigned long cbom_hartid;
+ u32 val, probed_block_size;
int ret;
- u32 val;
+ probed_block_size = 0;
for_each_of_cpu_node(node) {
unsigned long hartid;
- int cbom_hartid;
ret = riscv_of_processor_hartid(node, &hartid);
if (ret)
continue;
- if (hartid < 0)
- continue;
-
/* set block-size for cbom extension if available */
ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
if (ret)
continue;
- if (!riscv_cbom_block_size) {
- riscv_cbom_block_size = val;
+ if (!probed_block_size) {
+ probed_block_size = val;
cbom_hartid = hartid;
} else {
- if (riscv_cbom_block_size != val)
- pr_warn("cbom-block-size mismatched between harts %d and %lu\n",
+ if (probed_block_size != val)
+ pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
cbom_hartid, hartid);
}
}
+
+ if (probed_block_size)
+ riscv_cbom_block_size = probed_block_size;
}
#endif
diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index 3f502a1a68b1..d919efab6eba 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -74,5 +74,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
void riscv_noncoherent_supported(void)
{
+ WARN(!riscv_cbom_block_size,
+ "Non-coherent DMA support enabled without a block size\n");
noncoherent_supported = true;
}
--
2.37.2
More information about the linux-riscv
mailing list