[PATCH v1 3/3] irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handling
Samuel Holland
samuel at sholland.org
Mon Jun 27 06:58:29 PDT 2022
On 6/27/22 2:27 AM, Marc Zyngier wrote:
> On Mon, 27 Jun 2022 06:12:57 +0100,
> Samuel Holland <samuel at sholland.org> wrote:
>>
>> The T-HEAD PLIC ignores additional edges seen while an edge-triggered
>> interrupt is being handled. Because of this behavior, the driver needs
>> to complete edge-triggered interrupts in the .irq_ack callback before
>> handling them, instead of in the .irq_eoi callback afterward. Otherwise,
>> it could miss some interrupts.
>>
>> Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>> Signed-off-by: Samuel Holland <samuel at sholland.org>
>> ---
>>
>> Changes in v1:
>> - Use a flag for enabling the changes instead of a variant ID
>> - Use handle_edge_irq instead of handle_fasteoi_ack_irq
>> - Do not set the handler name, as RISC-V selects GENERIC_IRQ_SHOW_LEVEL
>
> Where is the Renesas handling gone? Can you, at the very least work,
> with Lad instead of proposing an alternative series that ignores the
> goal of the first one, however good it is (and it is admittedly
> better)?
Sorry, I have reached out to them, and will not send anything more until I hear
back. I thought it was clear that RZ/Five support becomes a trivial patch on top
of this, but I did not include it because there was some unresolved discussion
over what the compatible string should be.
>>
>> drivers/irqchip/irq-sifive-plic.c | 76 +++++++++++++++++++++++++++++--
>> 1 file changed, 71 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
>> index 90515865af08..462a93b4b088 100644
>> --- a/drivers/irqchip/irq-sifive-plic.c
>> +++ b/drivers/irqchip/irq-sifive-plic.c
>> @@ -69,6 +69,7 @@ struct plic_priv {
>> struct cpumask lmask;
>> struct irq_domain *irqdomain;
>> void __iomem *regs;
>> + bool needs_edge_handling;
>> };
>>
>> struct plic_handler {
>> @@ -86,6 +87,9 @@ static int plic_parent_irq __ro_after_init;
>> static bool plic_cpuhp_setup_done __ro_after_init;
>> static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
>>
>> +static struct irq_chip plic_edge_chip;
>> +static struct irq_chip plic_chip;
>> +
>> static void __plic_toggle(void __iomem *enable_base, int hwirq, int enable)
>> {
>> u32 __iomem *reg = enable_base + (hwirq / 32) * sizeof(u32);
>> @@ -181,6 +185,40 @@ static void plic_irq_eoi(struct irq_data *d)
>> }
>> }
>>
>> +static int plic_irq_set_type(struct irq_data *d, unsigned int flow_type)
>> +{
>> + struct plic_priv *priv = irq_data_get_irq_chip_data(d);
>> +
>> + if (!priv->needs_edge_handling)
>> + return IRQ_SET_MASK_OK_NOCOPY;
>> +
>> + switch (flow_type) {
>> + case IRQ_TYPE_EDGE_RISING:
>> + irq_set_chip_handler_name_locked(d, &plic_edge_chip,
>> + handle_edge_irq, NULL);
>> + break;
>> + case IRQ_TYPE_LEVEL_HIGH:
>> + irq_set_chip_handler_name_locked(d, &plic_chip,
>> + handle_fasteoi_irq, NULL);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return IRQ_SET_MASK_OK;
>> +}
>> +
>> +static struct irq_chip plic_edge_chip = {
>> + .name = "PLIC",
>> + .irq_ack = plic_irq_eoi,
>> + .irq_mask = plic_irq_mask,
>> + .irq_unmask = plic_irq_unmask,
>> +#ifdef CONFIG_SMP
>> + .irq_set_affinity = plic_set_affinity,
>> +#endif
>> + .irq_set_type = plic_irq_set_type,
>> +};
>> +
>> static struct irq_chip plic_chip = {
>> .name = "PLIC",
>> .irq_mask = plic_irq_mask,
>> @@ -189,8 +227,22 @@ static struct irq_chip plic_chip = {
>> #ifdef CONFIG_SMP
>> .irq_set_affinity = plic_set_affinity,
>> #endif
>> + .irq_set_type = plic_irq_set_type,
>> };
>>
>> +static int plic_irq_domain_translate(struct irq_domain *d,
>> + struct irq_fwspec *fwspec,
>> + unsigned long *hwirq,
>> + unsigned int *type)
>> +{
>> + struct plic_priv *priv = d->host_data;
>> +
>> + if (priv->needs_edge_handling)
>> + return irq_domain_translate_twocell(d, fwspec, hwirq, type);
>> + else
>> + return irq_domain_translate_onecell(d, fwspec, hwirq, type);
>> +}
>> +
>> static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
>> irq_hw_number_t hwirq)
>> {
>> @@ -211,7 +263,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
>> unsigned int type;
>> struct irq_fwspec *fwspec = arg;
>>
>> - ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
>> + ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type);
>> if (ret)
>> return ret;
>>
>> @@ -225,7 +277,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
>> }
>>
>> static const struct irq_domain_ops plic_irqdomain_ops = {
>> - .translate = irq_domain_translate_onecell,
>> + .translate = plic_irq_domain_translate,
>> .alloc = plic_irq_domain_alloc,
>> .free = irq_domain_free_irqs_top,
>> };
>> @@ -286,8 +338,9 @@ static int plic_starting_cpu(unsigned int cpu)
>> return 0;
>> }
>>
>> -static int __init plic_init(struct device_node *node,
>> - struct device_node *parent)
>> +static int __init __plic_init(struct device_node *node,
>> + struct device_node *parent,
>> + bool needs_edge_handling)
>> {
>> int error = 0, nr_contexts, nr_handlers = 0, i;
>> u32 nr_irqs;
>> @@ -298,6 +351,8 @@ static int __init plic_init(struct device_node *node,
>> if (!priv)
>> return -ENOMEM;
>>
>> + priv->needs_edge_handling = needs_edge_handling;
>> +
>> priv->regs = of_iomap(node, 0);
>> if (WARN_ON(!priv->regs)) {
>> error = -EIO;
>> @@ -415,6 +470,17 @@ static int __init plic_init(struct device_node *node,
>> return error;
>> }
>>
>> +static int __init plic_init(struct device_node *node,
>> + struct device_node *parent)
>> +{
>> + return __plic_init(node, parent, false);
>> +}
>> IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
>> IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
>> -IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
>> +
>> +static int __init plic_edge_init(struct device_node *node,
>> + struct device_node *parent)
>> +{
>> + return __plic_init(node, parent, true);
>> +}
>> +IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init);
>
> No. You are breaking existing platforms with established DTs. You must
> at least be able to run a new kernel with an old DT. Ideally the
> opposite too, but it is hard to retrofit this.
Thankfully, there are no established DTs for this platform. Upstreaming for
Allwinner D1 (the only documented user of this compatible) has been blocked by
its non-coherent DMA, which is just now getting resolved, including with other
major binding changes[1].
If you are referring more generally to DTs "in the wild", those all use
#interrupt-cells = <2> already, albeit with a stacked interrupt controller on
top that turned out not to be necessary[2].
Regards,
Samuel
[1]: https://lore.kernel.org/linux-riscv/20220619203212.3604485-2-heiko@sntech.de/
[2]:
https://github.com/smaeul/linux/blob/riscv/d1-wip/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
More information about the linux-riscv
mailing list