[PATCH v1 3/3] irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handling
Marc Zyngier
maz at kernel.org
Mon Jun 27 00:27:08 PDT 2022
On Mon, 27 Jun 2022 06:12:57 +0100,
Samuel Holland <samuel at sholland.org> wrote:
>
> The T-HEAD PLIC ignores additional edges seen while an edge-triggered
> interrupt is being handled. Because of this behavior, the driver needs
> to complete edge-triggered interrupts in the .irq_ack callback before
> handling them, instead of in the .irq_eoi callback afterward. Otherwise,
> it could miss some interrupts.
>
> Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
>
> Changes in v1:
> - Use a flag for enabling the changes instead of a variant ID
> - Use handle_edge_irq instead of handle_fasteoi_ack_irq
> - Do not set the handler name, as RISC-V selects GENERIC_IRQ_SHOW_LEVEL
Where is the Renesas handling gone? Can you, at the very least work,
with Lad instead of proposing an alternative series that ignores the
goal of the first one, however good it is (and it is admittedly
better)?
>
> drivers/irqchip/irq-sifive-plic.c | 76 +++++++++++++++++++++++++++++--
> 1 file changed, 71 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
> index 90515865af08..462a93b4b088 100644
> --- a/drivers/irqchip/irq-sifive-plic.c
> +++ b/drivers/irqchip/irq-sifive-plic.c
> @@ -69,6 +69,7 @@ struct plic_priv {
> struct cpumask lmask;
> struct irq_domain *irqdomain;
> void __iomem *regs;
> + bool needs_edge_handling;
> };
>
> struct plic_handler {
> @@ -86,6 +87,9 @@ static int plic_parent_irq __ro_after_init;
> static bool plic_cpuhp_setup_done __ro_after_init;
> static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
>
> +static struct irq_chip plic_edge_chip;
> +static struct irq_chip plic_chip;
> +
> static void __plic_toggle(void __iomem *enable_base, int hwirq, int enable)
> {
> u32 __iomem *reg = enable_base + (hwirq / 32) * sizeof(u32);
> @@ -181,6 +185,40 @@ static void plic_irq_eoi(struct irq_data *d)
> }
> }
>
> +static int plic_irq_set_type(struct irq_data *d, unsigned int flow_type)
> +{
> + struct plic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + if (!priv->needs_edge_handling)
> + return IRQ_SET_MASK_OK_NOCOPY;
> +
> + switch (flow_type) {
> + case IRQ_TYPE_EDGE_RISING:
> + irq_set_chip_handler_name_locked(d, &plic_edge_chip,
> + handle_edge_irq, NULL);
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_set_chip_handler_name_locked(d, &plic_chip,
> + handle_fasteoi_irq, NULL);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return IRQ_SET_MASK_OK;
> +}
> +
> +static struct irq_chip plic_edge_chip = {
> + .name = "PLIC",
> + .irq_ack = plic_irq_eoi,
> + .irq_mask = plic_irq_mask,
> + .irq_unmask = plic_irq_unmask,
> +#ifdef CONFIG_SMP
> + .irq_set_affinity = plic_set_affinity,
> +#endif
> + .irq_set_type = plic_irq_set_type,
> +};
> +
> static struct irq_chip plic_chip = {
> .name = "PLIC",
> .irq_mask = plic_irq_mask,
> @@ -189,8 +227,22 @@ static struct irq_chip plic_chip = {
> #ifdef CONFIG_SMP
> .irq_set_affinity = plic_set_affinity,
> #endif
> + .irq_set_type = plic_irq_set_type,
> };
>
> +static int plic_irq_domain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct plic_priv *priv = d->host_data;
> +
> + if (priv->needs_edge_handling)
> + return irq_domain_translate_twocell(d, fwspec, hwirq, type);
> + else
> + return irq_domain_translate_onecell(d, fwspec, hwirq, type);
> +}
> +
> static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> irq_hw_number_t hwirq)
> {
> @@ -211,7 +263,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int type;
> struct irq_fwspec *fwspec = arg;
>
> - ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
> + ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type);
> if (ret)
> return ret;
>
> @@ -225,7 +277,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> }
>
> static const struct irq_domain_ops plic_irqdomain_ops = {
> - .translate = irq_domain_translate_onecell,
> + .translate = plic_irq_domain_translate,
> .alloc = plic_irq_domain_alloc,
> .free = irq_domain_free_irqs_top,
> };
> @@ -286,8 +338,9 @@ static int plic_starting_cpu(unsigned int cpu)
> return 0;
> }
>
> -static int __init plic_init(struct device_node *node,
> - struct device_node *parent)
> +static int __init __plic_init(struct device_node *node,
> + struct device_node *parent,
> + bool needs_edge_handling)
> {
> int error = 0, nr_contexts, nr_handlers = 0, i;
> u32 nr_irqs;
> @@ -298,6 +351,8 @@ static int __init plic_init(struct device_node *node,
> if (!priv)
> return -ENOMEM;
>
> + priv->needs_edge_handling = needs_edge_handling;
> +
> priv->regs = of_iomap(node, 0);
> if (WARN_ON(!priv->regs)) {
> error = -EIO;
> @@ -415,6 +470,17 @@ static int __init plic_init(struct device_node *node,
> return error;
> }
>
> +static int __init plic_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + return __plic_init(node, parent, false);
> +}
> IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
> IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
> -IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
> +
> +static int __init plic_edge_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + return __plic_init(node, parent, true);
> +}
> +IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init);
No. You are breaking existing platforms with established DTs. You must
at least be able to run a new kernel with an old DT. Ideally the
opposite too, but it is hard to retrofit this.
M.
--
Without deviation from the norm, progress is not possible.
More information about the linux-riscv
mailing list