[PATCH v2 1/2] dt-bindings: riscv: Add optional DT property riscv,timer-can-wake-cpu

[Krzysztof Kozlowski]

On 27/07/2022 14:21, Anup Patel wrote:
> On Wed, Jul 27, 2022 at 5:37 PM Krzysztof Kozlowski
> <krzysztof.kozlowski at linaro.org> wrote:
>>
>> On 27/07/2022 13:43, Anup Patel wrote:
>>> We add an optional DT property riscv,timer-can-wake-cpu which if present
>>> in CPU DT node then CPU timer is always powered-on and never loses context.
>>>
>>> Signed-off-by: Anup Patel <apatel at ventanamicro.com>
>>> ---
>>>  Documentation/devicetree/bindings/riscv/cpus.yaml | 6 ++++++
>>>  1 file changed, 6 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
>>> index d632ac76532e..b60b64b4113a 100644
>>> --- a/Documentation/devicetree/bindings/riscv/cpus.yaml
>>> +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
>>> @@ -78,6 +78,12 @@ properties:
>>>        - rv64imac
>>>        - rv64imafdc
>>>
>>> +  riscv,timer-can-wake-cpu:
>>> +    type: boolean
>>> +    description:
>>> +      If present, the timer interrupt can wake up the CPU from
>>> +      suspend/idle state.
>>
>> Isn't this a property of a timer, not CPU? IOW, your timer node should
>> have "wakeup-source" property.
> 
> Historically (since the early days), we never had a timer node in the
> RISC-V world.
> 
>>
>> Now that's actual problem: why the RISC-V timer is bound to "riscv"
>> compatible, not to dedicated timer node? How is it related to actual CPU
>> (not SoC)?
> 
> The RISC-V timer is always present on all RISC-V platforms because

Timer is always present also on ARMv8 (and ARMv7) yet it has its node.

> the "time" CSR is defined by RISC-V privileged specification. The method
> to program per-CPU timer events in either using SBI call or Sstc CSRs.

Timer is still not part of CPU. Otherwise you are claiming here that CPU
can wakeup CPU...

> 
> Since, there is no dedicated timer node, we use CPU compatible string
> for probing the per-CPU timer.

Next time you add a properties:
riscv,saata-can-wake-cpu
riscv,usb-can-wake-cpu
riscv,interrupt-controller-can-wake-cpu

and so on and keep explaining that "historically" you did not define
separate nodes, so thus must be in CPU node.

You need to properly reflect hardware in the DTS instead of such hacks.

Best regards,
Krzysztof