[PATCH v1 2/2] riscv: dts: starfive: add the missing monitor core

Icenowy Zheng icenowy at aosc.io
Wed Jul 13 08:20:03 PDT 2022


在 2022-07-13星期三的 15:16 +0000,Conor.Dooley at microchip.com写道:
> On 13/07/2022 16:15, Icenowy Zheng wrote:
> > 在 2022-07-11星期一的 19:43 +0100,Conor Dooley写道:
> > > From: Conor Dooley <conor.dooley at microchip.com>
> > > 
> > > The JH7100 has a 32 bit monitor core that is missing from the
> > > device
> > > tree. Add it (and its cpu-map entry) to more accurately reflect
> > > the
> > > actual topology of the SoC.
> > > 
> > > Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> > > ---
> > >  arch/riscv/boot/dts/starfive/jh7100.dtsi | 21
> > > +++++++++++++++++++++
> > >  1 file changed, 21 insertions(+)
> > > 
> > > diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > index c617a61e26e2..92fce5b66d3d 100644
> > > --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > @@ -67,6 +67,23 @@ cpu1_intc: interrupt-controller {
> > >                         };
> > >                 };
> > >  
> > > +               E24: cpu at 2 {
> > > +                       compatible = "sifive,e24", "riscv";
> > 
> > Oh, by the way "sifive,e24" is not a documented compatible in the
> > DT
> > binding.
> > 
> > If you really want to add it here, you need to add the compatible
> > string to the DT binding first.
> 
> Check patch 1/2.

Oh sorry I forgot this.

Nevermind.

> 
> > 
> > > +                       reg = <2>;
> > > +                       device_type = "cpu";
> > > +                       i-cache-block-size = <32>;
> > > +                       i-cache-sets = <256>;
> > > +                       i-cache-size = <16384>;
> > > +                       riscv,isa = "rv32imafc";
> > > +                       status = "disabled";
> > > +
> > > +                       cpu2_intc: interrupt-controller {
> > > +                               compatible = "riscv,cpu-intc";
> > > +                               interrupt-controller;
> > > +                               #interrupt-cells = <1>;
> > > +                       };
> > > +               };
> > > +
> > >                 cpu-map {
> > >                         cluster0 {
> > >                                 core0 {
> > > @@ -76,6 +93,10 @@ core0 {
> > >                                 core1 {
> > >                                         cpu = <&U74_1>;
> > >                                 };
> > > +
> > > +                               core2 {
> > > +                                       cpu = <&E24>;
> > > +                               };
> > >                         };
> > >                 };
> > >         };
> > 
> > 





More information about the linux-riscv mailing list