[PATCH v3 0/4] Add PLIC support for Renesas RZ/Five SoC / Fix T-HEAD PLIC edge flow

Conor.Dooley at microchip.com Conor.Dooley at microchip.com
Wed Jul 13 00:00:49 PDT 2022


On 13/07/2022 04:19, Palmer Dabbelt wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Fri, 01 Jul 2022 07:28:48 PDT (-0700), Marc Zyngier wrote:
>> On 2022-06-30 11:02, Samuel Holland wrote:
>>> This patch series adds PLIC support for Renesas RZ/Five SoC.
>>>
>>> Since the T-HEAD C900 PLIC has the same behavior, it also applies the
>>> fix for that variant.
>>>
>>> This series is an update of v2 of the RZ/Five series[0], and replaces
>>> the separate T-HEAD series[1].
>>>
>>> [0]:
>>> https://lore.kernel.org/linux-riscv/20220626004326.8548-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
>>> [1]:
>>> https://lore.kernel.org/linux-riscv/20220627051257.38543-1-samuel@sholland.org/
>>>
>>> Changes in v3:
>>>  - Add a more detailed explanation for why #interrupt-cells differs
>>>  - Add andestech,nceplic100 as a fallback compatible
>>>  - Separate the conditional part of the binding into two blocks (one
>>> for
>>>    the PLIC implementation and the other for the SoC integration)
>>>  - Use a quirk bit for selecting the flow instead of a variant ID
>>>  - Use the andestech,nceplic100 compatible to select the new behavior
>>>  - Use handle_edge_irq instead of handle_fasteoi_ack_irq so .irq_ack
>>>    always gets called
>>>  - Do not set the handler name, as RISC-V selects
>>> GENERIC_IRQ_SHOW_LEVEL
>>>  - Use the same name for plic_edge_chip as plic_chip
>>>
>>> Changes in v2:
>>>  - Fixed review comments pointed by Marc and Krzysztof.
>>>
>>> Changes in v1:
>>>  - Fixed review comments pointed by Rob and Geert.
>>>  - Changed implementation for EDGE interrupt handling on Renesas
>>> RZ/Five
>>>    SoC.
>>>
>>> Lad Prabhakar (2):
>>>   dt-bindings: interrupt-controller: sifive,plic: Document Renesas
>>>     RZ/Five SoC
>>>   irqchip/sifive-plic: Add support for Renesas RZ/Five SoC
>>>
>>> Samuel Holland (2):
>>>   dt-bindings: interrupt-controller: Require trigger type for T-HEAD
>>>     PLIC
>>>   irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handling
>>>
>>>  .../sifive,plic-1.0.0.yaml                    | 65 +++++++++++++--
>>>  drivers/irqchip/irq-sifive-plic.c             | 80 +++++++++++++++++--
>>>  2 files changed, 135 insertions(+), 10 deletions(-)
>>
>> I'm going to provisionally queue this into -next so that it
>> can get some testing. I'd still want the DT changes to be
>> Ack'ed before the next merge window though.
> 
> +David, as IIRC he still tests on SiFive hardware.

Not David, but FWIW:
I have not done any specific testing, but I've been running various
-next revisions since this was put in there (on PolarFire & u540)
and have not noticed anything obviously wrong.
Thanks,
Conor.

> 
> Acked-by: Palmer Dabbelt <palmer at rivosinc.com>
> 
> Though I also wait for Rob on DT stuff (I saw the other thread), so not
> sure that helps any.
> 
> Thanks!
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



More information about the linux-riscv mailing list