[PATCH v6 1/2] i2c: add support for microchip fpga i2c controllers

Conor.Dooley at microchip.com Conor.Dooley at microchip.com
Wed Jul 6 01:03:26 PDT 2022



On 06/07/2022 08:19, Wolfram Sang wrote:
> Hi Conor,
> 
> thank you for sending this driver.
> 
> On Tue, Jun 21, 2022 at 08:42:38AM +0100, Conor Dooley wrote:
>> Add Microchip CoreI2C i2c controller support. This driver supports the
>> "hard" i2c controller on the Microchip PolarFire SoC & the basic feature
>> set for "soft" i2c controller implemtations in the FPGA fabric.
>>
>> Co-developed-by: Daire McNamara <daire.mcnamara at microchip.com>
>> Signed-off-by: Daire McNamara <daire.mcnamara at microchip.com>
>> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> 
> Where are the bindings? Are they already on the way upstream?
> 
>>   drivers/i2c/busses/i2c-microchip-core.c | 486 ++++++++++++++++++++++++
> 
> The biggest remark I have is to rename the driver a little. Usually a
> "-core" suffix means that there are other drivers like "-platform" or
> "-pci" use this core. Would "i2c-microchip-fpga" or
> "i2c-microchip-corei2c" work for you?

I'd prefer the latter. Being called "core" is unfortunate and I
did think about that. i2c-microchip-corei2c would have been my
first choice but I thought the double usage of i2c would've been
disapproved of haha

> 
>> +#include <linux/clk.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/err.h>
>> +#include <linux/i2c.h>
>> +#include <linux/iopoll.h>
> 
> Do you really need that?

Nope!

> 
> ...
> 
>> +static irqreturn_t mchp_corei2c_handle_isr(struct mchp_corei2c_dev *idev)
>> +{
>> +	u32 status = idev->isr_status;
>> +	u8 ctrl;
>> +	bool last_byte = false, finished = false;
>> +
>> +	if (!idev->buf)
>> +		return IRQ_NONE;
>> +
>> +	switch (status) {
>> +	case STATUS_M_START_SENT:
>> +	case STATUS_M_REPEATED_START_SENT:
>> +		ctrl = readb(idev->base + CORE_I2C_CTRL);
>> +		ctrl &= ~CTRL_STA;
>> +		writeb(idev->addr, idev->base + CORE_I2C_DATA);
>> +		writeb(ctrl, idev->base + CORE_I2C_CTRL);
>> +		if (idev->msg_len <= 0)
>> +			finished = true;
> 
> How can it happen that len is < 0? Wouldn't that be an error case?
> 
> ...
> 
>> +static u32 mchp_corei2c_func(struct i2c_adapter *adap)
>> +{
>> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> 
> Have you testes SMBUS_QUICK as well?

Not specifically SMBUS_QUICK, but I did test with hardware
that uses "zero-length" messages.

> 
> ...
> 
>> +	idev->dev = &pdev->dev;
>> +	init_completion(&idev->msg_complete);
>> +	spin_lock_init(&idev->lock);
> 
> You never use this lock.

And nor did we in any prior version (pre-list).
I am just going to remove it.

> 
> ...
> 
>> +	idev->adapter.owner = THIS_MODULE;
>> +	idev->adapter.algo = &mchp_corei2c_algo;
>> +	idev->adapter.dev.parent = &pdev->dev;
>> +	idev->adapter.dev.of_node = pdev->dev.of_node;
>> +	idev->adapter.timeout = MICROCHIP_I2C_TIMEOUT;
> 
> Simply use HZ here?

Sure.

Thanks for the review :)



More information about the linux-riscv mailing list