[PATCH v5 01/13] dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
Conor Dooley
mail at conchuod.ie
Tue Jul 5 14:52:02 PDT 2022
From: Conor Dooley <conor.dooley at microchip.com>
A dt-schema binding for the Ilitek ili9341 was created as
panel/ilitek,ili9341.yaml but the txt binding was ignored in the
process. Move the remaining items in the txt binding to the yaml one &
delete it.
The example in the txt binding has a spi-max-frequency which disagrees
with the yaml replacement (and its own documentation) so change that to
conform with the binding. There are no users in tree of the Adafruit
yx240qv29 to check against.
Link: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf
Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
.../bindings/display/ilitek,ili9341.txt | 27 -----------
.../display/panel/ilitek,ili9341.yaml | 48 +++++++++++++------
2 files changed, 34 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible: "adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios: D/C pin
-- reset-gpios: Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
- display at 0{
- compatible = "adafruit,yx240qv29", "ilitek,ili9341";
- reg = <0>;
- spi-max-frequency = <32000000>;
- dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- rotation = <270>;
- backlight = <&backlight>;
- };
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
index 6058948a9764..c5571391ca28 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -21,6 +21,7 @@ properties:
compatible:
items:
- enum:
+ - adafruit,yx240qv29
# ili9341 240*320 Color on stm32f429-disco board
- st,sf-tc240t-9370-t
- const: ilitek,ili9341
@@ -47,31 +48,50 @@ properties:
vddi-led-supply:
description: Voltage supply for the LED driver (1.65 .. 3.3 V)
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
- reg
- dc-gpios
- - port
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,sf-tc240t-9370-t
+then:
+ required:
+ - port
examples:
- |+
+ #include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
panel: display at 0 {
- compatible = "st,sf-tc240t-9370-t",
- "ilitek,ili9341";
- reg = <0>;
- spi-3wire;
- spi-max-frequency = <10000000>;
- dc-gpios = <&gpiod 13 0>;
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
- };
+ compatible = "st,sf-tc240t-9370-t",
+ "ilitek,ili9341";
+ reg = <0>;
+ spi-3wire;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpiod 13 0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ display at 1{
+ compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ rotation = <270>;
+ backlight = <&backlight>;
};
+ };
...
--
2.37.0
More information about the linux-riscv
mailing list