[PATCH 1/5] riscv: dts: starfive: Add JH7100 CPU topology

[Conor Dooley]

From: Jonas Hahnfeld <hahnjo at hahnjo.de>

Add cpu-map binding to inform the kernel about the hardware topology
of the CPU cores.

Before this change, lstopo would report 1 core with 2 threads:
Machine (7231MB total)
  Package L#0
    NUMANode L#0 (P#0 7231MB)
    L2 L#0 (2048KB) + Core L#0
      L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
      L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)

After this change, it correctly identifies two cores:
Machine (7231MB total)
  Package L#0
    NUMANode L#0 (P#0 7231MB)
    L2 L#0 (2048KB)
      L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
      L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)

Signed-off-by: Jonas Hahnfeld <hahnjo at hahnjo.de>
Co-developed-by: Emil Renner Berthing <kernel at esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/boot/dts/starfive/jh7100.dtsi | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 69f22f9aad9d..c617a61e26e2 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -17,7 +17,7 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu at 0 {
+		U74_0: cpu at 0 {
 			compatible = "sifive,u74-mc", "riscv";
 			reg = <0>;
 			d-cache-block-size = <64>;
@@ -42,7 +42,7 @@ cpu0_intc: interrupt-controller {
 			};
 		};
 
-		cpu at 1 {
+		U74_1: cpu at 1 {
 			compatible = "sifive,u74-mc", "riscv";
 			reg = <1>;
 			d-cache-block-size = <64>;
@@ -66,6 +66,18 @@ cpu1_intc: interrupt-controller {
 				#interrupt-cells = <1>;
 			};
 		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&U74_0>;
+				};
+
+				core1 {
+					cpu = <&U74_1>;
+				};
+			};
+		};
 	};
 
 	osc_sys: osc_sys {
-- 
2.37.0