[PATCH v2 05/12] riscv: dts: microchip: add mpfs specific macb reset support

Conor Dooley conor.dooley at microchip.com
Mon Jul 4 05:15:52 PDT 2022


The macb on PolarFire SoC has reset support which the generic compatible
does not use. Add the newly introduced MPFS specific compatible as the
primary compatible to avail of this support & wire up the reset to the
clock controllers devicetree entry.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 8c3259134194..5a33cbf9467a 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -197,6 +197,7 @@ clkcfg: clkcfg at 20002000 {
 			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
 			clocks = <&refclk>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		mmuart0: serial at 20000000 {
@@ -331,7 +332,7 @@ i2c1: i2c at 2010b000 {
 		};
 
 		mac0: ethernet at 20110000 {
-			compatible = "cdns,macb";
+			compatible = "microchip,mpfs-macb", "cdns,macb";
 			reg = <0x0 0x20110000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -340,11 +341,12 @@ mac0: ethernet at 20110000 {
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
+			resets = <&clkcfg CLK_MAC0>;
 			status = "disabled";
 		};
 
 		mac1: ethernet at 20112000 {
-			compatible = "cdns,macb";
+			compatible = "microchip,mpfs-macb", "cdns,macb";
 			reg = <0x0 0x20112000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -353,6 +355,7 @@ mac1: ethernet at 20112000 {
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
+			resets = <&clkcfg CLK_MAC1>;
 			status = "disabled";
 		};
 
-- 
2.36.1




More information about the linux-riscv mailing list