[PATCH v4 1/3] riscv: dts: Add dma-channels property in dma node

[Vinod Koul]

On 17-01-22, 09:35, Zong Li wrote:
> Add dma-channels property, then we can determine how many channels there
> by device tree.
> 
> Signed-off-by: Zong Li <zong.li at sifive.com>
> ---
>  arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 1 +
>  arch/riscv/boot/dts/sifive/fu540-c000.dtsi        | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index c9f6d205d2ba..3c48f2d7a4a4 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -188,6 +188,7 @@ dma at 3000000 {

Unrelated but the node name should be dma-controller at ...

>  			reg = <0x0 0x3000000 0x0 0x8000>;
>  			interrupt-parent = <&plic>;
>  			interrupts = <23 24 25 26 27 28 29 30>;
> +			dma-channels = <4>;
>  			#dma-cells = <1>;
>  		};
>  
> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> index 0655b5c4201d..2bdfe7f06e4b 100644
> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> @@ -171,6 +171,7 @@ dma: dma at 3000000 {
>  			reg = <0x0 0x3000000 0x0 0x8000>;
>  			interrupt-parent = <&plic0>;
>  			interrupts = <23 24 25 26 27 28 29 30>;
> +			dma-channels = <4>;
>  			#dma-cells = <1>;
>  		};
>  		uart1: serial at 10011000 {
> -- 
> 2.31.1

-- 
~Vinod