[PATCH v4 1/3] riscv: dts: Add dma-channels property in dma node

[Palmer Dabbelt]

On Sun, 16 Jan 2022 17:35:26 PST (-0800), zong.li at sifive.com wrote:
> Add dma-channels property, then we can determine how many channels there
> by device tree.
>
> Signed-off-by: Zong Li <zong.li at sifive.com>
> ---
>  arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 1 +
>  arch/riscv/boot/dts/sifive/fu540-c000.dtsi        | 1 +
>  2 files changed, 2 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index c9f6d205d2ba..3c48f2d7a4a4 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -188,6 +188,7 @@ dma at 3000000 {
>  			reg = <0x0 0x3000000 0x0 0x8000>;
>  			interrupt-parent = <&plic>;
>  			interrupts = <23 24 25 26 27 28 29 30>;
> +			dma-channels = <4>;
>  			#dma-cells = <1>;
>  		};
>
> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> index 0655b5c4201d..2bdfe7f06e4b 100644
> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> @@ -171,6 +171,7 @@ dma: dma at 3000000 {
>  			reg = <0x0 0x3000000 0x0 0x8000>;
>  			interrupt-parent = <&plic0>;
>  			interrupts = <23 24 25 26 27 28 29 30>;
> +			dma-channels = <4>;
>  			#dma-cells = <1>;
>  		};
>  		uart1: serial at 10011000 {

I've got some comments in on the bindings, but I'm assuming it's easier 
to keep these all together.  Happy to take this through the RISC-V tree, 
but I'm guessing it'll be easier to take these via dmaengine as there's 
a lot more diff there so

Reviewed-by: Palmer Dabbelt <palmer at rivosinc.com>
Acked-by: Palmer Dabbelt <palmer at rivosinc.com>

Thanks!