[PATCH v2 2/9] dt-bindings: riscv: microchip: document the aries m100pfsevp

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue Aug 30 09:55:47 PDT 2022


On 30/08/2022 18:25, Conor.Dooley at microchip.com wrote:
> On 30/08/2022 15:37, Krzysztof Kozlowski wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> On 30/08/2022 13:17, Conor Dooley wrote:
>>> Add compatibles for both configurations of the Aries Embedded
>>> M100PFSEVP SOM + EVK platform.
>>>
>>> Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes
>>> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
>>> ---
>>>  Documentation/devicetree/bindings/riscv/microchip.yaml | 3 +++
>>>  1 file changed, 3 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml
>>> index 485981fbfb4b..04ebd48caaa7 100644
>>> --- a/Documentation/devicetree/bindings/riscv/microchip.yaml
>>> +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml
>>> @@ -27,9 +27,12 @@ properties:
>>>
>>>        - items:
>>>            - enum:
>>> +              - aries,m100pfsevp-emmc
>>> +              - aries,m100pfsevp-sdcard
>>
>> Usually sd card is pluggable, so what is the actual difference here? For
>> example this one:
>> https://shop.aries-embedded.de/evaluation-kit/m/m100pfsevp/445/m100pfsevp-250baab
>> has eMMC and SD card...
> 
> Yeah, both are there but it is muxed by the bootloader using a GPIO. For
> icicle this is done by a mux in the FPGA fabric instead. T

Ah, this is still just one MMC controller - either as eMMC or as SD-card?

> w dts were
> needed so that the gpio-hog could be set correctly. Out of curiosity, I can
> have the same compatible in multiple devicetrees right? In that case, it
> would just be "aries,m100pfsevp" here and I could put that in both?
> Would make things easier..

Depends, but I would say for this case rather not. The compatible should
identify the board. If the boards are different, one compatible should
not identify both of them. Imagine U-Boot (or something else) trying to
match the DTS.

Best regards,
Krzysztof



More information about the linux-riscv mailing list