[PATCH] drivers/perf: riscv_pmu_sbi: add support for PMU variant on T-Head C9xx cores

[Atish Patra]

On Wed, Aug 17, 2022 at 4:13 AM Heiko Stuebner <heiko at sntech.de> wrote:
>
> With the T-HEAD C9XX cores being designed before or during the ratification
> to the SSCOFPMF extension, they implement functionality very similar but
> not equal to it. So add some adaptions to allow the C9XX to still handle
> its PMU through the regular SBI PMU interface instead of defining new
> interfaces or drivers.
>

IMO, vendor specific workarounds in the generic implementation is not
a good idea.
If we have to support it, I think we should just put the IRQ number in
the DT and parse from the DT.
The initial sscofpmf series was based on the DT. It was removed later
as there was no need for it at that time.
We can always revive it.

Regarding the CSR number difference and static key enablement, can we
use code patching techniques here as well ?
At least all the T-HEAD C9XX core erratas are in one place.

The alternate would be just to say T-HEAD C9XX support SSCOFPMF but
with erratas. I don't prefer this approach
but it keeps the vendor specific checks out of the generic code.

> To work properly, this requires a matching change in SBI, though the actual
> interface between kernel and SBI does not change.
>

Do you have a working OpenSBI implementation for this ?

> The main differences are a the overflow CSR and irq number.
>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>  drivers/perf/riscv_pmu_sbi.c | 27 +++++++++++++++++++--------
>  1 file changed, 19 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index 6f6681bbfd36..4589166e0de4 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -41,12 +41,17 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
>         NULL,
>  };
>
> +#define THEAD_C9XX_RV_IRQ_PMU                  17
> +#define THEAD_C9XX_CSR_SCOUNTEROF              0x5c5
> +
>  /*
>   * RISC-V doesn't have hetergenous harts yet. This need to be part of
>   * per_cpu in case of harts with different pmu counters
>   */
>  static union sbi_pmu_ctr_info *pmu_ctr_list;
> +static unsigned int riscv_pmu_irq_num;
>  static unsigned int riscv_pmu_irq;
> +static bool is_thead_c9xx;
>
>  struct sbi_pmu_event_data {
>         union {
> @@ -575,7 +580,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
>         fidx = find_first_bit(cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS);
>         event = cpu_hw_evt->events[fidx];
>         if (!event) {
> -               csr_clear(CSR_SIP, SIP_LCOFIP);
> +               csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
>                 return IRQ_NONE;
>         }
>
> @@ -583,13 +588,14 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
>         pmu_sbi_stop_hw_ctrs(pmu);
>
>         /* Overflow status register should only be read after counter are stopped */
> -       overflow = csr_read(CSR_SSCOUNTOVF);
> +       overflow = !is_thead_c9xx ? csr_read(CSR_SSCOUNTOVF)
> +                                 : csr_read(THEAD_C9XX_CSR_SCOUNTEROF);
>
>         /*
>          * Overflow interrupt pending bit should only be cleared after stopping
>          * all the counters to avoid any race condition.
>          */
> -       csr_clear(CSR_SIP, SIP_LCOFIP);
> +       csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
>
>         /* No overflow bit is set */
>         if (!overflow)
> @@ -653,8 +659,8 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
>
>         if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
>                 cpu_hw_evt->irq = riscv_pmu_irq;
> -               csr_clear(CSR_IP, BIT(RV_IRQ_PMU));
> -               csr_set(CSR_IE, BIT(RV_IRQ_PMU));
> +               csr_clear(CSR_IP, BIT(riscv_pmu_irq_num));
> +               csr_set(CSR_IE, BIT(riscv_pmu_irq_num));
>                 enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
>         }
>
> @@ -665,7 +671,7 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
>  {
>         if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
>                 disable_percpu_irq(riscv_pmu_irq);
> -               csr_clear(CSR_IE, BIT(RV_IRQ_PMU));
> +               csr_clear(CSR_IE, BIT(riscv_pmu_irq_num));
>         }
>
>         /* Disable all counters access for user mode now */
> @@ -681,7 +687,11 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>         struct device_node *cpu, *child;
>         struct irq_domain *domain = NULL;
>
> -       if (!riscv_isa_extension_available(NULL, SSCOFPMF))
> +       is_thead_c9xx = (sbi_get_mvendorid() == THEAD_VENDOR_ID &&
> +                        sbi_get_marchid() == 0 &&
> +                        sbi_get_mimpid() == 0);
> +
> +       if (!riscv_isa_extension_available(NULL, SSCOFPMF) && !is_thead_c9xx)
>                 return -EOPNOTSUPP;
>
>         for_each_of_cpu_node(cpu) {
> @@ -703,7 +713,8 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
>                 return -ENODEV;
>         }
>
> -       riscv_pmu_irq = irq_create_mapping(domain, RV_IRQ_PMU);
> +       riscv_pmu_irq_num = !is_thead_c9xx ? RV_IRQ_PMU : THEAD_C9XX_RV_IRQ_PMU;
> +       riscv_pmu_irq = irq_create_mapping(domain, riscv_pmu_irq_num);
>         if (!riscv_pmu_irq) {
>                 pr_err("Failed to map PMU interrupt for node\n");
>                 return -ENODEV;
> --
> 2.35.1
>


-- 
Regards,
Atish