[PATCH v6 0/1] Add Polarfire SoC GPIO support

lewis.hanly at microchip.com lewis.hanly at microchip.com
Mon Aug 15 05:08:33 PDT 2022


From: Lewis Hanly <lewis.hanly at microchip.com>


Add a driver to support the Polarfire SoC gpio controller.
Tested with latest 5.19 kernel.

MPFS gpio interrupts are connected to IOMUX configured by system 
register GPIO_INTERRUPT_FAB_CR(31:0). Interrupt connection for
some GPIO's to the PLIC (Platform Level Interrupt Controller) can be 
shared (not directly connected) or direct if connection is available.

previously upstreamed dt-bindings: gpio: microchip,mpfs-gpio.yaml

Changes in v6
Fixed typo causing compile issue with kernel 6.0-rc1

Changes in v5
Added the const for the irqchip, removed in error from v2.

Changes in v4
Changed the interrupt handling from Hierarchical flow to chained interrupt
flow. The reason for the change was with hierarchical flow we requried
a interrupt number mapping array to work with our HW and this was not acceptable.
On reviewing the architecture the chained interrupt flow works better
for our hardware and configurations which are not fixed in Silicon.
Added support to read the optional DT property ngpios.

Changes in v3:
Changed order in kconfig.
Removed blank lines in driver header/source file.
Removed BYTE_BOUNDARY variable and use macro to do *4.
mpfs_gpio_assign_bit parameter uses macro instead of (i * BYTE_BOUNDARY).
Add correct definitions for direction.
Change order of variables in mpfs_gpio_irq_set_type function.
Return dev_err_probe instead of dev_err.
Remove noise of dev_inf.
Avoid using of_match_ptr.
use devm_gpiochip_add_data(..)
Update mpfs_gpio_remove. 

Changes in v2:
Use raw_spinlock.
Use __assign_bit() to assign bit, added a bool variable for value.
Remove unnecessary checking gpio_index.
Remove default from switch statement.
Use const for irq_chip, name updated and use mask/unmask.
Use latest kernel api irq set_chip.
Implemented hierarchical interrupt chip support, although
suggested to use chained interrupt flow I believe this fits better.

Lewis Hanly (1):
  gpio: mpfs: add polarfire soc gpio support

 drivers/gpio/Kconfig     |   7 +
 drivers/gpio/Makefile    |   1 +
 drivers/gpio/gpio-mpfs.c | 317 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 325 insertions(+)
 create mode 100644 drivers/gpio/gpio-mpfs.c

-- 
2.25.1




More information about the linux-riscv mailing list