[Crash-utility][PATCH V2 0/9] Support RISCV64 arch and common commands

HAGIO KAZUHITO(萩尾 一仁) k-hagio-ab at nec.com
Thu Aug 4 19:36:46 PDT 2022


On 2022/08/01 13:30, Xianting Tian wrote:
> This series of patches are for Crash-utility tool, it make crash tool support
> RISCV64 arch and the common commands(*, bt, p, rd, mod, log, set, struct, task,
> dis, help -r, help -m, and so on).
> 
> To make the crash tool work normally for RISCV64 arch, we need a Linux kernel
> patch(wait for apply), which exports the kernel virtual memory layout, va_bits,
> phys_ram_base to vmcoreinfo, it can simplify the development of crash tool.
> 
> The Linux kernel patch set:
> https://lore.kernel.org/linux-riscv/20220726093729.1231867-1-xianting.tian@linux.alibaba.com/
>   
> This series of patches are tested on QEMU RISCV64 env and SoC platform of
> T-head Xuantie 910 RISCV64 CPU.
> 
> ====================================
>    Some test examples list as below
> ====================================
> ... ...
>        KERNEL: vmlinux
>      DUMPFILE: vmcore
>          CPUS: 1
>          DATE: Fri Jul 15 10:24:25 CST 2022
>        UPTIME: 00:00:33
> LOAD AVERAGE: 0.05, 0.01, 0.00
>         TASKS: 41
>      NODENAME: buildroot
>       RELEASE: 5.18.9
>       VERSION: #30 SMP Fri Jul 15 09:47:03 CST 2022
>       MACHINE: riscv64  (unknown Mhz)
>        MEMORY: 1 GB
>         PANIC: "Kernel panic - not syncing: sysrq triggered crash"
>           PID: 113
>       COMMAND: "sh"
>          TASK: ff60000002269600  [THREAD_INFO: ff60000002269600]
>           CPU: 0
>         STATE: TASK_RUNNING (PANIC)
> 
> carsh>
> 
> crash> p mem_map
> mem_map = $1 = (struct page *) 0xff6000003effbf00
> 
> crash> p /x *(struct page *) 0xff6000003effbf00
> $5 = {
>    flags = 0x1000,
>    {
>      {
>        {
>          lru = {
>            next = 0xff6000003effbf08,
>            prev = 0xff6000003effbf08
>          },
>          {
>            __filler = 0xff6000003effbf08,
>            mlock_count = 0x3effbf08
>          }
>        },
>        mapping = 0x0,
>        index = 0x0,
>        private = 0x0
>      },
>    ... ...
> 
> crash> mod
>       MODULE       NAME             BASE         SIZE  OBJECT FILE
> ffffffff0113e740  nvme_core  ffffffff01133000  98304  (not loaded)  [CONFIG_KALLSYMS]
> ffffffff011542c0  nvme       ffffffff0114c000  61440  (not loaded)  [CONFIG_KALLSYMS]
> 
> crash> rd ffffffff0113e740 8
> ffffffff0113e740:  0000000000000000 ffffffff810874f8   .........t......
> ffffffff0113e750:  ffffffff011542c8 726f635f656d766e   .B......nvme_cor
> ffffffff0113e760:  0000000000000065 0000000000000000   e...............
> ffffffff0113e770:  0000000000000000 0000000000000000   ................
> 
> crash> vtop ffffffff0113e740
> VIRTUAL           PHYSICAL
> ffffffff0113e740  8254d740
> 
>     PGD: ffffffff810e9ff8 => 2ffff001
>    P4D: 0000000000000000 => 000000002fffec01
>    PUD: 00005605c2957470 => 0000000020949801
>    PMD: 00007fff7f1750c0 => 0000000020947401
>     PTE: 0 => 209534e7
>   PAGE: 000000008254d000
> 
>    PTE     PHYSICAL  FLAGS
> 209534e7  8254d000  (PRESENT|READ|WRITE|GLOBAL|ACCESSED|DIRTY)
> 
>        PAGE       PHYSICAL      MAPPING       INDEX CNT FLAGS
> ff6000003f0777d8 8254d000                0        0  1 0
> 
> crash> bt
> PID: 113      TASK: ff6000000226c200  CPU: 0    COMMAND: "sh"
>   #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8
>   #1 [ff20000010333cf0] panic at ffffffff806578c6
>   #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c
>   #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604
>   #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4
>   #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8
>   #6 [ff20000010333e40] vfs_write at ffffffff80152bb2
>   #7 [ff20000010333e80] ksys_write at ffffffff80152eda
>   #8 [ff20000010333ed0] sys_write at ffffffff80152f52
> 
> -------
> Changes V1 -> V2:
>   1, Do the below fixes based on HAGIO KAZUHITO's comments:
>      Fix build warnings,
>      Use MACRO for Linux version,
>      Add description of x86_64 binary for riscv64 in README,
>      Fix build error for the "sticky" target for build on x86_64,
>      Fix the mixed indent.
>   2, Add 'help -m/M' support patch to this patch set.
>   3, Support native compiling approach, which means the host OS distro
>      is also a riscv64 (lp64d) Linux, based on Yixun Lan's comments.
>   4, Use __riscv and __riscv_xlen instead of __riscv64__ based on Yixun Lan's comments.

Thank you for the v2, looks good to me.
So with the kernel patch set merged,

Acked-by: Kazuhito Hagio <k-hagio-ab at nec.com>

(no need to add this tag to the patches)

Thanks,
Kazu

> 
> Xianting Tian (9):
>    Add RISCV64 framework code support
>    RISCV64: Make crash tool enter command line and support some commands
>    RISCV64: Add 'dis' command support
>    RISCV64: Add 'irq' command support
>    RISCV64: Add 'bt' command support
>    RISCV64: Add 'help -r' command support
>    RISCV64: Add 'help -m/M' command support
>    RISCV64: Add 'mach' command support
>    RISCV64: Add the implementation of symbol verify
> 
>   Makefile            |    7 +-
>   README              |    4 +-
>   configure.c         |   43 +-
>   defs.h              |  248 +++++++-
>   diskdump.c          |   21 +-
>   help.c              |    2 +-
>   lkcd_vmdump_v1.h    |    2 +
>   lkcd_vmdump_v2_v3.h |    4 +-
>   netdump.c           |   22 +-
>   ramdump.c           |    2 +
>   riscv64.c           | 1492 +++++++++++++++++++++++++++++++++++++++++++
>   symbols.c           |   10 +
>   12 files changed, 1847 insertions(+), 10 deletions(-)
>   create mode 100644 riscv64.c
> 


More information about the linux-riscv mailing list