[RFC PATCH v2 07/11] irqchip: Add ACLINT software interrupt driver

Anup Patel anup at brainfault.org
Mon Jul 26 09:05:04 PDT 2021


On Mon, Jul 26, 2021 at 7:55 PM Marc Zyngier <maz at kernel.org> wrote:
>
> On Fri, 18 Jun 2021 13:38:47 +0100,
> Anup Patel <anup.patel at wdc.com> wrote:
> >
> > The RISC-V ACLINT provides MSWI and SSWI devices for M-mode and
> > S-mode software interrupts respectively. We add irqchip driver
> > which provide IPI operations based on ACLINT [M|S]SWI devices
> > to the Linux RISC-V kernel.
> >
> > Signed-off-by: Anup Patel <anup.patel at wdc.com>
> > ---
> >  drivers/irqchip/Kconfig          |  11 ++
> >  drivers/irqchip/Makefile         |   1 +
> >  drivers/irqchip/irq-aclint-swi.c | 271 +++++++++++++++++++++++++++++++
> >  3 files changed, 283 insertions(+)
> >  create mode 100644 drivers/irqchip/irq-aclint-swi.c
> >
> > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> > index 62543a4eccc0..2010d493b03b 100644
> > --- a/drivers/irqchip/Kconfig
> > +++ b/drivers/irqchip/Kconfig
> > @@ -508,6 +508,17 @@ config RISCV_INTC
> >
> >          If you don't know what to do here, say Y.
> >
> > +config RISCV_ACLINT_SWI
> > +     bool "RISC-V Advanced Core Local Interruptor Software Interrupts"
> > +     depends on RISCV
> > +     help
> > +        This enables support for software interrupts using the Advanced
> > +        Core Local Interruptor (ACLINT) found in RISC-V systems.  The
> > +        RISC-V ACLINT provides devices for inter-process interrupt and
> > +        timer functionality.
> > +
> > +        If you don't know what to do here, say Y.
>
> Let's face it, nobody knows what to say. So instead of asking the
> question, how about selecting it from the platform support config
> instead?

Yes, this will be mostly selected by platform support config. In fact,
the PATCH8 already selects it for the virt machine.

Let me remove this last line.

>
> > +
> >  config SIFIVE_PLIC
> >       bool "SiFive Platform-Level Interrupt Controller"
> >       depends on RISCV
> > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> > index f88cbf36a9d2..a6edf6733c1d 100644
> > --- a/drivers/irqchip/Makefile
> > +++ b/drivers/irqchip/Makefile
> > @@ -97,6 +97,7 @@ obj-$(CONFIG_QCOM_PDC)                      += qcom-pdc.o
> >  obj-$(CONFIG_CSKY_MPINTC)            += irq-csky-mpintc.o
> >  obj-$(CONFIG_CSKY_APB_INTC)          += irq-csky-apb-intc.o
> >  obj-$(CONFIG_RISCV_INTC)             += irq-riscv-intc.o
> > +obj-$(CONFIG_RISCV_ACLINT_SWI)               += irq-aclint-swi.o
> >  obj-$(CONFIG_SIFIVE_PLIC)            += irq-sifive-plic.o
> >  obj-$(CONFIG_IMX_IRQSTEER)           += irq-imx-irqsteer.o
> >  obj-$(CONFIG_IMX_INTMUX)             += irq-imx-intmux.o
> > diff --git a/drivers/irqchip/irq-aclint-swi.c b/drivers/irqchip/irq-aclint-swi.c
> > new file mode 100644
> > index 000000000000..a31a7fc504d1
> > --- /dev/null
> > +++ b/drivers/irqchip/irq-aclint-swi.c
> > @@ -0,0 +1,271 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> > + */
> > +
> > +#define pr_fmt(fmt) "aclint-swi: " fmt
> > +#include <linux/cpu.h>
> > +#include <linux/cpumask.h>
> > +#include <linux/io.h>
> > +#include <linux/init.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/smp.h>
> > +
> > +struct aclint_swi {
> > +     void __iomem *sip_reg;
> > +     unsigned long bits;
> > +};
> > +
> > +static int aclint_swi_parent_irq __ro_after_init;
> > +static struct irq_domain *aclint_swi_domain __ro_after_init;
> > +static DEFINE_PER_CPU(struct aclint_swi, aclint_swis);
> > +
> > +static void aclint_swi_dummy_mask_unmask(struct irq_data *d)
> > +{
> > +}
> > +
> > +static void aclint_swi_send_mask(struct irq_data *d,
> > +                               const struct cpumask *mask)
> > +{
> > +     int cpu;
> > +     struct aclint_swi *swi;
> > +
> > +     /* Barrier before doing atomic bit update to IPI bits */
> > +     smp_mb__before_atomic();
> > +
> > +     for_each_cpu(cpu, mask) {
> > +             swi = per_cpu_ptr(&aclint_swis, cpu);
> > +             set_bit(d->hwirq, &swi->bits);
> > +             writel(1, swi->sip_reg);
> > +     }
> > +
> > +     /* Barrier after doing atomic bit update to IPI bits */
> > +     smp_mb__after_atomic();
> > +}
> > +
> > +static struct irq_chip aclint_swi_chip = {
> > +     .name = "RISC-V ACLINT SWI",
> > +     .irq_mask       = aclint_swi_dummy_mask_unmask,
>
> Please call this function something that doesn't immediately
> contradict the callback it is assigned to.

Okay, I will choose a better name for this callback.

>
> > +     .irq_unmask     = aclint_swi_dummy_mask_unmask,
> > +     .ipi_send_mask  = aclint_swi_send_mask,
> > +};
> > +
> > +static int aclint_swi_domain_map(struct irq_domain *d, unsigned int irq,
> > +                              irq_hw_number_t hwirq)
> > +{
> > +     irq_set_percpu_devid(irq);
> > +     irq_domain_set_info(d, irq, hwirq, &aclint_swi_chip, d->host_data,
> > +                         handle_percpu_devid_irq, NULL, NULL);
> > +
> > +     return 0;
> > +}
> > +
> > +static int aclint_swi_domain_alloc(struct irq_domain *d, unsigned int virq,
> > +                                unsigned int nr_irqs, void *arg)
> > +{
> > +     int i, ret;
> > +     irq_hw_number_t hwirq;
> > +     unsigned int type = IRQ_TYPE_NONE;
> > +     struct irq_fwspec *fwspec = arg;
> > +
> > +     ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
> > +     if (ret)
> > +             return ret;
> > +
> > +     for (i = 0; i < nr_irqs; i++) {
> > +             ret = aclint_swi_domain_map(d, virq + i, hwirq + i);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct irq_domain_ops aclint_swi_domain_ops = {
> > +     .translate      = irq_domain_translate_onecell,
> > +     .alloc          = aclint_swi_domain_alloc,
> > +     .free           = irq_domain_free_irqs_top,
> > +};
> > +
> > +static void aclint_swi_handle_irq(struct irq_desc *desc)
> > +{
> > +     int irq;
> > +     unsigned long irqs;
> > +     irq_hw_number_t hwirq;
> > +     struct irq_chip *chip = irq_desc_get_chip(desc);
> > +     struct aclint_swi *swi = this_cpu_ptr(&aclint_swis);
> > +
> > +     chained_irq_enter(chip, desc);
> > +
> > +     writel(0, swi->sip_reg);
> > +
> > +     while (true) {
> > +             /* Order bit clearing and data access. */
> > +             mb();
> > +
> > +             irqs = xchg(&swi->bits, 0);
> > +             if (!irqs)
> > +                     goto done;
> > +
> > +             for (hwirq = 0; hwirq < BITS_PER_LONG; hwirq++) {
> > +                     if (!(BIT(hwirq) & irqs))
> > +                             continue;
>
>                 for_each_set_bit(hwirq, &irqs, BITS_PER_LONG) {

Sure, I will use for_each_set_bit() here.

>
> > +
> > +                     irq = irq_find_mapping(aclint_swi_domain, hwirq);
> > +                     if (unlikely(irq <= 0))
> > +                             pr_warn_ratelimited(
> > +                                     "can't find mapping for hwirq %lu\n",
> > +                                     hwirq);
> > +                     else
> > +                             generic_handle_irq(irq);
>
> You can now convert this over to generic_handle_domain_irq().

Sure, I will use generic_handle_domain_irq().

>
> > +             }
> > +     }
>
> So you can loop here and consume bits forever, but only ack the
> interrupt once? This feels sketchy.

Aargh, I accidently put writel() out of the loop. We should have one
writel() everytime we consume the bits.

I will update this.

>
> > +
> > +done:
> > +     chained_irq_exit(chip, desc);
> > +}
> > +
> > +static int aclint_swi_dying_cpu(unsigned int cpu)
> > +{
> > +     disable_percpu_irq(aclint_swi_parent_irq);
> > +     return 0;
> > +}
> > +
> > +static int aclint_swi_starting_cpu(unsigned int cpu)
> > +{
> > +     enable_percpu_irq(aclint_swi_parent_irq,
> > +                       irq_get_trigger_type(aclint_swi_parent_irq));
> > +     return 0;
> > +}
> > +
> > +static int __init aclint_swi_set_virq(void)
> > +{
> > +     int virq;
> > +     struct irq_fwspec ipi = {
> > +             .fwnode         = aclint_swi_domain->fwnode,
> > +             .param_count    = 1,
> > +             .param[0]       = 0,
> > +     };
> > +
> > +     virq = __irq_domain_alloc_irqs(aclint_swi_domain, -1, BITS_PER_LONG,
> > +                                    NUMA_NO_NODE, &ipi,
> > +                                    false, NULL);
> > +     if (virq <= 0) {
> > +             pr_err("unable to alloc IRQs from SBI IPI IRQ domain\n");
> > +             return -ENOMEM;
> > +     }
> > +
> > +     riscv_ipi_set_virq_range(virq, BITS_PER_LONG, true);
> > +
> > +     return 0;
> > +}
> > +
> > +static int __init aclint_swi_domain_init(struct device_node *node)
> > +{
> > +     /*
> > +      * We can have multiple ACLINT SWI devices but we only need
> > +      * one IRQ domain for providing per-HART (or per-CPU) IPIs.
> > +      */
> > +     if (aclint_swi_domain)
> > +             return 0;
> > +
> > +     aclint_swi_domain = irq_domain_add_linear(node, BITS_PER_LONG,
> > +                                             &aclint_swi_domain_ops, NULL);
> > +     if (!aclint_swi_domain) {
> > +             pr_err("unable to add ACLINT SWI IRQ domain\n");
> > +             return -ENOMEM;
> > +     }
> > +
> > +     return aclint_swi_set_virq();
> > +}
> > +
> > +static int __init aclint_swi_init(struct device_node *node,
> > +                               struct device_node *parent)
> > +{
> > +     int rc;
> > +     void __iomem *base;
> > +     struct aclint_swi *swi;
> > +     u32 i, nr_irqs, nr_cpus = 0;
> > +
> > +     /* Map the registers */
> > +     base = of_iomap(node, 0);
> > +     if (!base) {
> > +             pr_err("%pOFP: could not map registers\n", node);
> > +             return -ENODEV;
> > +     }
> > +
> > +     /* Iterarte over each target CPU connected with this ACLINT */
> > +     nr_irqs = of_irq_count(node);
> > +     for (i = 0; i < nr_irqs; i++) {
> > +             struct of_phandle_args parent;
> > +             int cpu, hartid;
> > +
> > +             if (of_irq_parse_one(node, i, &parent)) {
> > +                     pr_err("%pOFP: failed to parse irq %d.\n",
> > +                            node, i);
> > +                     continue;
> > +             }
> > +
> > +             if (parent.args[0] != RV_IRQ_SOFT) {
> > +                     pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
> > +                            node, i, parent.args[0]);
> > +                     continue;
> > +             }
> > +
> > +             hartid = riscv_of_parent_hartid(parent.np);
> > +             if (hartid < 0) {
> > +                     pr_warn("failed to parse hart ID for irq %d.\n", i);
> > +                     continue;
> > +             }
> > +
> > +             cpu = riscv_hartid_to_cpuid(hartid);
> > +             if (cpu < 0) {
> > +                     pr_warn("Invalid cpuid for irq %d\n", i);
> > +                     continue;
> > +             }
> > +
> > +             /* Find parent domain and register chained handler */
> > +             if (!aclint_swi_parent_irq && irq_find_host(parent.np)) {
> > +                     aclint_swi_parent_irq = irq_of_parse_and_map(node, i);
> > +                     if (aclint_swi_parent_irq) {
>
> What is the point of describing all the interrupts for each and every
> CPU if you only need *one* to establish the routing on behalf of all
> CPUs?

The parent interrupt controller for ACLINT is RISC-V local interrupt
controller (INTC) which is within each HART (or CPU). We have one
RISC-V INTC DT node under each CPU DT node so the RISC-V INTC
driver registers a single IRQ domain only for the boot CPU (which could
be HART with any HART ID not necessarily zero).

The RISC-V INTC IRQ domain provides the parent IRQ for the IPI domain
registered by the ACLINT device. The interrupts-extended property of
ACLINT DT node points to a set of CPUs which the given ACLINT device
targets so we loop over all the IRQs to find the RISC-V INTC IRQ domain.
(Note: This is very similar to how SiFive PLIC driver finds parent IRQ
domain using interrupts-extended DT property)

Also, on multi-cluster (or multi-socket) platforms we will have multiple
ACLINT devices where each ACLINT device targets different sets of
CPUs (or HARTs).

Here are ACLINT DT node examples from DT bindings patch:

     // Example 1 (RISC-V MSWI device used by Linux RISC-V NoMMU kernel):

    interrupt-controller at 2000000 {
      compatible = "riscv,aclint-mswi";
      interrupts-extended = <&cpu1intc 3 &cpu2intc 3 &cpu3intc 3 &cpu4intc 3>;
      reg = <0x2000000 0x4000>;
      interrupt-controller;
      #interrupt-cells = <0>;
    };

    // Example 2 (RISC-V SSWI device used by Linux RISC-V MMU kernel):

    interrupt-controller at 2100000 {
      compatible = "riscv,aclint-sswi";
      interrupts-extended = <&cpu1intc 1 &cpu2intc 1 &cpu3intc 1 &cpu4intc 1>;
      reg = <0x2100000 0x4000>;
      interrupt-controller;
      #interrupt-cells = <0>;
    };

>
> > +                             irq_set_chained_handler(aclint_swi_parent_irq,
> > +                                                     aclint_swi_handle_irq);
> > +                             cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> > +                                     "irqchip/riscv/aclint-swi:starting",
> > +                                     aclint_swi_starting_cpu,
> > +                                     aclint_swi_dying_cpu);
> > +                     }
> > +             }
>
> else?
>
> > +
> > +             swi = per_cpu_ptr(&aclint_swis, cpu);
> > +             swi->sip_reg = base + i * sizeof(u32);
> > +             writel(0, swi->sip_reg);
> > +
> > +             nr_cpus++;
> > +     }
> > +
> > +     /* Create the IPI domain for ACLINT SWI device */
> > +     rc = aclint_swi_domain_init(node);
> > +     if (rc)
> > +             return rc;
> > +
> > +     /* Announce the ACLINT SWI device */
> > +     pr_info("%pOFP: providing IPIs for %d CPUs\n", node, nr_cpus);
> > +
> > +     return 0;
> > +}
> > +
> > +#ifdef CONFIG_RISCV_M_MODE
> > +IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,clint0", aclint_swi_init);
> > +IRQCHIP_DECLARE(riscv_aclint_swi1, "sifive,clint0", aclint_swi_init);
> > +IRQCHIP_DECLARE(riscv_aclint_swi2, "riscv,aclint-mswi", aclint_swi_init);
> > +#else
> > +IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,aclint-sswi", aclint_swi_init);
> > +#endif
> > --
> > 2.25.1
> >
> >
>
> Thanks,
>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.

Regards,
Anup



More information about the linux-riscv mailing list