[RFC PATCH v2 07/11] irqchip: Add ACLINT software interrupt driver
Marc Zyngier
maz at kernel.org
Mon Jul 26 07:25:36 PDT 2021
On Fri, 18 Jun 2021 13:38:47 +0100,
Anup Patel <anup.patel at wdc.com> wrote:
>
> The RISC-V ACLINT provides MSWI and SSWI devices for M-mode and
> S-mode software interrupts respectively. We add irqchip driver
> which provide IPI operations based on ACLINT [M|S]SWI devices
> to the Linux RISC-V kernel.
>
> Signed-off-by: Anup Patel <anup.patel at wdc.com>
> ---
> drivers/irqchip/Kconfig | 11 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-aclint-swi.c | 271 +++++++++++++++++++++++++++++++
> 3 files changed, 283 insertions(+)
> create mode 100644 drivers/irqchip/irq-aclint-swi.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 62543a4eccc0..2010d493b03b 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -508,6 +508,17 @@ config RISCV_INTC
>
> If you don't know what to do here, say Y.
>
> +config RISCV_ACLINT_SWI
> + bool "RISC-V Advanced Core Local Interruptor Software Interrupts"
> + depends on RISCV
> + help
> + This enables support for software interrupts using the Advanced
> + Core Local Interruptor (ACLINT) found in RISC-V systems. The
> + RISC-V ACLINT provides devices for inter-process interrupt and
> + timer functionality.
> +
> + If you don't know what to do here, say Y.
Let's face it, nobody knows what to say. So instead of asking the
question, how about selecting it from the platform support config
instead?
> +
> config SIFIVE_PLIC
> bool "SiFive Platform-Level Interrupt Controller"
> depends on RISCV
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index f88cbf36a9d2..a6edf6733c1d 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -97,6 +97,7 @@ obj-$(CONFIG_QCOM_PDC) += qcom-pdc.o
> obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
> obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
> +obj-$(CONFIG_RISCV_ACLINT_SWI) += irq-aclint-swi.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
> diff --git a/drivers/irqchip/irq-aclint-swi.c b/drivers/irqchip/irq-aclint-swi.c
> new file mode 100644
> index 000000000000..a31a7fc504d1
> --- /dev/null
> +++ b/drivers/irqchip/irq-aclint-swi.c
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> + */
> +
> +#define pr_fmt(fmt) "aclint-swi: " fmt
> +#include <linux/cpu.h>
> +#include <linux/cpumask.h>
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/smp.h>
> +
> +struct aclint_swi {
> + void __iomem *sip_reg;
> + unsigned long bits;
> +};
> +
> +static int aclint_swi_parent_irq __ro_after_init;
> +static struct irq_domain *aclint_swi_domain __ro_after_init;
> +static DEFINE_PER_CPU(struct aclint_swi, aclint_swis);
> +
> +static void aclint_swi_dummy_mask_unmask(struct irq_data *d)
> +{
> +}
> +
> +static void aclint_swi_send_mask(struct irq_data *d,
> + const struct cpumask *mask)
> +{
> + int cpu;
> + struct aclint_swi *swi;
> +
> + /* Barrier before doing atomic bit update to IPI bits */
> + smp_mb__before_atomic();
> +
> + for_each_cpu(cpu, mask) {
> + swi = per_cpu_ptr(&aclint_swis, cpu);
> + set_bit(d->hwirq, &swi->bits);
> + writel(1, swi->sip_reg);
> + }
> +
> + /* Barrier after doing atomic bit update to IPI bits */
> + smp_mb__after_atomic();
> +}
> +
> +static struct irq_chip aclint_swi_chip = {
> + .name = "RISC-V ACLINT SWI",
> + .irq_mask = aclint_swi_dummy_mask_unmask,
Please call this function something that doesn't immediately
contradict the callback it is assigned to.
> + .irq_unmask = aclint_swi_dummy_mask_unmask,
> + .ipi_send_mask = aclint_swi_send_mask,
> +};
> +
> +static int aclint_swi_domain_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_percpu_devid(irq);
> + irq_domain_set_info(d, irq, hwirq, &aclint_swi_chip, d->host_data,
> + handle_percpu_devid_irq, NULL, NULL);
> +
> + return 0;
> +}
> +
> +static int aclint_swi_domain_alloc(struct irq_domain *d, unsigned int virq,
> + unsigned int nr_irqs, void *arg)
> +{
> + int i, ret;
> + irq_hw_number_t hwirq;
> + unsigned int type = IRQ_TYPE_NONE;
> + struct irq_fwspec *fwspec = arg;
> +
> + ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + ret = aclint_swi_domain_map(d, virq + i, hwirq + i);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aclint_swi_domain_ops = {
> + .translate = irq_domain_translate_onecell,
> + .alloc = aclint_swi_domain_alloc,
> + .free = irq_domain_free_irqs_top,
> +};
> +
> +static void aclint_swi_handle_irq(struct irq_desc *desc)
> +{
> + int irq;
> + unsigned long irqs;
> + irq_hw_number_t hwirq;
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct aclint_swi *swi = this_cpu_ptr(&aclint_swis);
> +
> + chained_irq_enter(chip, desc);
> +
> + writel(0, swi->sip_reg);
> +
> + while (true) {
> + /* Order bit clearing and data access. */
> + mb();
> +
> + irqs = xchg(&swi->bits, 0);
> + if (!irqs)
> + goto done;
> +
> + for (hwirq = 0; hwirq < BITS_PER_LONG; hwirq++) {
> + if (!(BIT(hwirq) & irqs))
> + continue;
for_each_set_bit(hwirq, &irqs, BITS_PER_LONG) {
> +
> + irq = irq_find_mapping(aclint_swi_domain, hwirq);
> + if (unlikely(irq <= 0))
> + pr_warn_ratelimited(
> + "can't find mapping for hwirq %lu\n",
> + hwirq);
> + else
> + generic_handle_irq(irq);
You can now convert this over to generic_handle_domain_irq().
> + }
> + }
So you can loop here and consume bits forever, but only ack the
interrupt once? This feels sketchy.
> +
> +done:
> + chained_irq_exit(chip, desc);
> +}
> +
> +static int aclint_swi_dying_cpu(unsigned int cpu)
> +{
> + disable_percpu_irq(aclint_swi_parent_irq);
> + return 0;
> +}
> +
> +static int aclint_swi_starting_cpu(unsigned int cpu)
> +{
> + enable_percpu_irq(aclint_swi_parent_irq,
> + irq_get_trigger_type(aclint_swi_parent_irq));
> + return 0;
> +}
> +
> +static int __init aclint_swi_set_virq(void)
> +{
> + int virq;
> + struct irq_fwspec ipi = {
> + .fwnode = aclint_swi_domain->fwnode,
> + .param_count = 1,
> + .param[0] = 0,
> + };
> +
> + virq = __irq_domain_alloc_irqs(aclint_swi_domain, -1, BITS_PER_LONG,
> + NUMA_NO_NODE, &ipi,
> + false, NULL);
> + if (virq <= 0) {
> + pr_err("unable to alloc IRQs from SBI IPI IRQ domain\n");
> + return -ENOMEM;
> + }
> +
> + riscv_ipi_set_virq_range(virq, BITS_PER_LONG, true);
> +
> + return 0;
> +}
> +
> +static int __init aclint_swi_domain_init(struct device_node *node)
> +{
> + /*
> + * We can have multiple ACLINT SWI devices but we only need
> + * one IRQ domain for providing per-HART (or per-CPU) IPIs.
> + */
> + if (aclint_swi_domain)
> + return 0;
> +
> + aclint_swi_domain = irq_domain_add_linear(node, BITS_PER_LONG,
> + &aclint_swi_domain_ops, NULL);
> + if (!aclint_swi_domain) {
> + pr_err("unable to add ACLINT SWI IRQ domain\n");
> + return -ENOMEM;
> + }
> +
> + return aclint_swi_set_virq();
> +}
> +
> +static int __init aclint_swi_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + int rc;
> + void __iomem *base;
> + struct aclint_swi *swi;
> + u32 i, nr_irqs, nr_cpus = 0;
> +
> + /* Map the registers */
> + base = of_iomap(node, 0);
> + if (!base) {
> + pr_err("%pOFP: could not map registers\n", node);
> + return -ENODEV;
> + }
> +
> + /* Iterarte over each target CPU connected with this ACLINT */
> + nr_irqs = of_irq_count(node);
> + for (i = 0; i < nr_irqs; i++) {
> + struct of_phandle_args parent;
> + int cpu, hartid;
> +
> + if (of_irq_parse_one(node, i, &parent)) {
> + pr_err("%pOFP: failed to parse irq %d.\n",
> + node, i);
> + continue;
> + }
> +
> + if (parent.args[0] != RV_IRQ_SOFT) {
> + pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
> + node, i, parent.args[0]);
> + continue;
> + }
> +
> + hartid = riscv_of_parent_hartid(parent.np);
> + if (hartid < 0) {
> + pr_warn("failed to parse hart ID for irq %d.\n", i);
> + continue;
> + }
> +
> + cpu = riscv_hartid_to_cpuid(hartid);
> + if (cpu < 0) {
> + pr_warn("Invalid cpuid for irq %d\n", i);
> + continue;
> + }
> +
> + /* Find parent domain and register chained handler */
> + if (!aclint_swi_parent_irq && irq_find_host(parent.np)) {
> + aclint_swi_parent_irq = irq_of_parse_and_map(node, i);
> + if (aclint_swi_parent_irq) {
What is the point of describing all the interrupts for each and every
CPU if you only need *one* to establish the routing on behalf of all
CPUs?
> + irq_set_chained_handler(aclint_swi_parent_irq,
> + aclint_swi_handle_irq);
> + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> + "irqchip/riscv/aclint-swi:starting",
> + aclint_swi_starting_cpu,
> + aclint_swi_dying_cpu);
> + }
> + }
else?
> +
> + swi = per_cpu_ptr(&aclint_swis, cpu);
> + swi->sip_reg = base + i * sizeof(u32);
> + writel(0, swi->sip_reg);
> +
> + nr_cpus++;
> + }
> +
> + /* Create the IPI domain for ACLINT SWI device */
> + rc = aclint_swi_domain_init(node);
> + if (rc)
> + return rc;
> +
> + /* Announce the ACLINT SWI device */
> + pr_info("%pOFP: providing IPIs for %d CPUs\n", node, nr_cpus);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_RISCV_M_MODE
> +IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,clint0", aclint_swi_init);
> +IRQCHIP_DECLARE(riscv_aclint_swi1, "sifive,clint0", aclint_swi_init);
> +IRQCHIP_DECLARE(riscv_aclint_swi2, "riscv,aclint-mswi", aclint_swi_init);
> +#else
> +IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,aclint-sswi", aclint_swi_init);
> +#endif
> --
> 2.25.1
>
>
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
More information about the linux-riscv
mailing list