[PATCH 14/32] dt-bindings: Define all Kendryte K210 clock IDs

[Sean Anderson]

On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Define unique arbitrary IDs for all 44 clocks available on the Kendryte
> K210 RISC-V SoC in the header file include/dt-bindings/clock/k210-clk.h.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
>  include/dt-bindings/clock/k210-clk.h | 61 +++++++++++++++++++++++-----
>  1 file changed, 50 insertions(+), 11 deletions(-)
> 
> diff --git a/include/dt-bindings/clock/k210-clk.h b/include/dt-bindings/clock/k210-clk.h
> index 5a2fd64d1a49..8d7ab2f0737c 100644
> --- a/include/dt-bindings/clock/k210-clk.h
> +++ b/include/dt-bindings/clock/k210-clk.h
> @@ -3,18 +3,57 @@
>   * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
>   * Copyright (c) 2020 Western Digital Corporation or its affiliates.
>   */
> -#ifndef K210_CLK_H
> -#define K210_CLK_H
> +#ifndef CLOCK_K210_CLK_H
> +#define CLOCK_K210_CLK_H
>  
>  /*
> - * Arbitrary identifiers for clocks.
> - * The structure is: in0 -> pll0 -> aclk -> cpu
> - *
> - * Since we use the hardware defaults for now, set all these to the same clock.
> + * Kendryte K210 SoC clock identifiers (arbitrary values).
>   */
> -#define K210_CLK_PLL0   0
> -#define K210_CLK_PLL1   0
> -#define K210_CLK_ACLK   0
> -#define K210_CLK_CPU    0
> +#define K210_CLK_IN0	0
> +#define K210_CLK_PLL0	1
> +#define K210_CLK_PLL1	2
> +#define K210_CLK_PLL2	3
> +#define K210_CLK_ACLK	4
> +#define K210_CLK_CPU	5
> +#define K210_CLK_CLINT	6
> +#define K210_CLK_DMA	7
> +#define K210_CLK_FFT	8
> +#define K210_CLK_SRAM0	9
> +#define K210_CLK_SRAM1	10
> +#define K210_CLK_ROM	11
> +#define K210_CLK_DVP	12
> +#define K210_CLK_APB0	13
> +#define K210_CLK_APB1	14
> +#define K210_CLK_APB2	15
> +#define K210_CLK_AI	16
> +#define K210_CLK_I2S0	17
> +#define K210_CLK_I2S1	18
> +#define K210_CLK_I2S2	19
> +#define K210_CLK_I2S0_M	20
> +#define K210_CLK_I2S1_M	21
> +#define K210_CLK_I2S2_M	22
> +#define K210_CLK_WDT0	23
> +#define K210_CLK_WDT1	24
> +#define K210_CLK_SPI0	25
> +#define K210_CLK_SPI1	26
> +#define K210_CLK_SPI2	27
> +#define K210_CLK_I2C0	28
> +#define K210_CLK_I2C1	29
> +#define K210_CLK_I2C2	30
> +#define K210_CLK_SPI3	31
> +#define K210_CLK_TIMER0	32
> +#define K210_CLK_TIMER1	33
> +#define K210_CLK_TIMER2	34
> +#define K210_CLK_GPIO	35
> +#define K210_CLK_UART1	36
> +#define K210_CLK_UART2	37
> +#define K210_CLK_UART3	38
> +#define K210_CLK_FPIOA	39
> +#define K210_CLK_SHA	40
> +#define K210_CLK_AES	41
> +#define K210_CLK_OTP	42
> +#define K210_CLK_RTC	43
>  
> -#endif /* K210_CLK_H */
> +#define K210_NUM_CLKS	44
> +
> +#endif /* CLOCK_K210_CLK_H */
> 

Reviewed-by: Sean Anderson <seanga2 at gmail.com>