[PATCH 14/32] dt-bindings: Define all Kendryte K210 clock IDs

Damien Le Moal damien.lemoal at wdc.com
Sat Nov 7 03:14:02 EST 2020


Define unique arbitrary IDs for all 44 clocks available on the Kendryte
K210 RISC-V SoC in the header file include/dt-bindings/clock/k210-clk.h.

Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
---
 include/dt-bindings/clock/k210-clk.h | 61 +++++++++++++++++++++++-----
 1 file changed, 50 insertions(+), 11 deletions(-)

diff --git a/include/dt-bindings/clock/k210-clk.h b/include/dt-bindings/clock/k210-clk.h
index 5a2fd64d1a49..8d7ab2f0737c 100644
--- a/include/dt-bindings/clock/k210-clk.h
+++ b/include/dt-bindings/clock/k210-clk.h
@@ -3,18 +3,57 @@
  * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
  * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
-#ifndef K210_CLK_H
-#define K210_CLK_H
+#ifndef CLOCK_K210_CLK_H
+#define CLOCK_K210_CLK_H
 
 /*
- * Arbitrary identifiers for clocks.
- * The structure is: in0 -> pll0 -> aclk -> cpu
- *
- * Since we use the hardware defaults for now, set all these to the same clock.
+ * Kendryte K210 SoC clock identifiers (arbitrary values).
  */
-#define K210_CLK_PLL0   0
-#define K210_CLK_PLL1   0
-#define K210_CLK_ACLK   0
-#define K210_CLK_CPU    0
+#define K210_CLK_IN0	0
+#define K210_CLK_PLL0	1
+#define K210_CLK_PLL1	2
+#define K210_CLK_PLL2	3
+#define K210_CLK_ACLK	4
+#define K210_CLK_CPU	5
+#define K210_CLK_CLINT	6
+#define K210_CLK_DMA	7
+#define K210_CLK_FFT	8
+#define K210_CLK_SRAM0	9
+#define K210_CLK_SRAM1	10
+#define K210_CLK_ROM	11
+#define K210_CLK_DVP	12
+#define K210_CLK_APB0	13
+#define K210_CLK_APB1	14
+#define K210_CLK_APB2	15
+#define K210_CLK_AI	16
+#define K210_CLK_I2S0	17
+#define K210_CLK_I2S1	18
+#define K210_CLK_I2S2	19
+#define K210_CLK_I2S0_M	20
+#define K210_CLK_I2S1_M	21
+#define K210_CLK_I2S2_M	22
+#define K210_CLK_WDT0	23
+#define K210_CLK_WDT1	24
+#define K210_CLK_SPI0	25
+#define K210_CLK_SPI1	26
+#define K210_CLK_SPI2	27
+#define K210_CLK_I2C0	28
+#define K210_CLK_I2C1	29
+#define K210_CLK_I2C2	30
+#define K210_CLK_SPI3	31
+#define K210_CLK_TIMER0	32
+#define K210_CLK_TIMER1	33
+#define K210_CLK_TIMER2	34
+#define K210_CLK_GPIO	35
+#define K210_CLK_UART1	36
+#define K210_CLK_UART2	37
+#define K210_CLK_UART3	38
+#define K210_CLK_FPIOA	39
+#define K210_CLK_SHA	40
+#define K210_CLK_AES	41
+#define K210_CLK_OTP	42
+#define K210_CLK_RTC	43
 
-#endif /* K210_CLK_H */
+#define K210_NUM_CLKS	44
+
+#endif /* CLOCK_K210_CLK_H */
-- 
2.28.0




More information about the linux-riscv mailing list