[RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board

[Atish Patra]

On Tue, Nov 3, 2020 at 10:50 AM <Cyril.Jean at microchip.com> wrote:
>
> On 11/3/20 6:38 PM, Atish Patra wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > On Tue, Nov 3, 2020 at 10:19 AM <Cyril.Jean at microchip.com> wrote:
> >> On 11/3/20 10:00 AM, Bin Meng wrote:
> >>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >>>
> >>> On Fri, Oct 30, 2020 at 5:08 PM Anup Patel <anup at brainfault.org> wrote:
> >>>> On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra at wdc.com> wrote:
> >>>>> Add initial DTS for Microchip ICICLE board having only
> >>>>> essential devcies (clocks, sdhci, ethernet, serial, etc).
> >>>>>
> >>>>> Signed-off-by: Atish Patra <atish.patra at wdc.com>
> >>>>> ---
> >>>>>    arch/riscv/boot/dts/Makefile                  |   1 +
> >>>>>    arch/riscv/boot/dts/microchip/Makefile        |   2 +
> >>>>>    .../microchip/microchip-icicle-kit-a000.dts   | 313 ++++++++++++++++++
> >>>> I suggest we split this DTS into two parts:
> >>>> 1. SOC (microchip-polarfire.dtsi)
> >>>> 2. Board (microchip-icicle-kit-a000.dts)
> >>> I also doubt what is the correct board name. I suspect the -a000 comes
> >>> from the SiFive board name convention, but does not apply to the
> >>> Icicle Kit board.
> >>>
> >>> @Cyril, please confirm.
> >>>
> >> Correct. Sorry Padmarao, I missed that one.
> >>
> > Ok. I picked that one from U-Boot. What should be the correct board
> > name in that case ?
> >
> > microchip-pfsoc-icicle-kit ?
>
> My preference would go for microchip-mpfs-icicle-kit. I prefer "mpfs"
> over "pfsoc" as "mpfs" is the part number prefix for the PolarFire SoC
> device family.
>

Sure. I will update accordingly. Thanks for the quick feedback.

>
> Regards,
>
> Cyril.
>
>


-- 
Regards,
Atish