[RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board

[Cyril.Jean at microchip.com]

On 11/3/20 6:38 PM, Atish Patra wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Tue, Nov 3, 2020 at 10:19 AM <Cyril.Jean at microchip.com> wrote:
>> On 11/3/20 10:00 AM, Bin Meng wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> On Fri, Oct 30, 2020 at 5:08 PM Anup Patel <anup at brainfault.org> wrote:
>>>> On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra at wdc.com> wrote:
>>>>> Add initial DTS for Microchip ICICLE board having only
>>>>> essential devcies (clocks, sdhci, ethernet, serial, etc).
>>>>>
>>>>> Signed-off-by: Atish Patra <atish.patra at wdc.com>
>>>>> ---
>>>>>    arch/riscv/boot/dts/Makefile                  |   1 +
>>>>>    arch/riscv/boot/dts/microchip/Makefile        |   2 +
>>>>>    .../microchip/microchip-icicle-kit-a000.dts   | 313 ++++++++++++++++++
>>>> I suggest we split this DTS into two parts:
>>>> 1. SOC (microchip-polarfire.dtsi)
>>>> 2. Board (microchip-icicle-kit-a000.dts)
>>> I also doubt what is the correct board name. I suspect the -a000 comes
>>> from the SiFive board name convention, but does not apply to the
>>> Icicle Kit board.
>>>
>>> @Cyril, please confirm.
>>>
>> Correct. Sorry Padmarao, I missed that one.
>>
> Ok. I picked that one from U-Boot. What should be the correct board
> name in that case ?
>
> microchip-pfsoc-icicle-kit ?

My preference would go for microchip-mpfs-icicle-kit. I prefer "mpfs" 
over "pfsoc" as "mpfs" is the part number prefix for the PolarFire SoC 
device family.


Regards,

Cyril.