[PATCH v21 14/14] arm64: dts: qcom: kaanapali-mtp-camera-s5kjn5: Add DT overlay

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] dts: qcom: missing vddm-supply in s5kjn5 camera node
--

commit c1df83521b79d78bdf83d4c496be4b0e82a9f05c
Author: Hangxiang Ma <hangxiang.ma at oss.qualcomm.com>

arm64: dts: qcom: kaanapali-mtp-camera-s5kjn5: Add DT overlay

This commit enables the S5KJN5 image sensor via CCI on the Kaanapali MTP
board. It adds a device tree overlay for the camera module connected to
the CSIPHY2 interface in four lane mode.

> diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso b/arch/arm64/boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso
> new file mode 100644
> index 0000000000000..d0e39855e0e62
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso
[ ... ]
> +&cci0_i2c1 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	camera at 10 {
> +		compatible = "samsung,s5kjn5";
> +		reg = <0x10>;
> +
> +		reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&cam_mclk2_default &cam_reset2_default>;
> +
> +		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
> +		assigned-clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
> +		assigned-clock-rates = <19200000>;
> +
> +		vddio-supply = <&vreg_l4n_1p8>;
> +		vddd-supply = <&vreg_l1m_1p0>;
> +		vdda-supply = <&vreg_l4m_2p2>;
> +		vddio1p2-supply = <&vreg_l2n_1p2>;
> +		afvdd-supply = <&vreg_l7m_2p8>;

[Severity: High]
Does this device tree node omit the vddm-supply property?

Looking at the s5kjn5 driver in drivers/media/i2c/s5kjn5.c, it
unconditionally requires the "vddm" regulator during probe:

static const char * const s5kjn5_supply_names[] = {
	"vddio",
	"vddd",
	"vddm",
	"vdda",
	"vddio1p2",
	"afvdd",
};

Missing this property in the DT overlay will cause the driver probe to
fail with -ENODEV, or if the regulator core substitutes a dummy regulator,
the physical MIPI PHY power domain may remain unpowered, causing the sensor
to fail to stream.

> +
> +		port {
> +			s5kjn5_out_ep: endpoint {
> +				data-lanes = <1 2 3 4>;
> +				link-frequencies = /bits/ 64 <1248000000>;
> +				remote-endpoint = <&csiphy2_in_ep>;
> +			};
> +		};
> +	};
> +};

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261011-kaanapali-camss-v21-0-04fd28d815c6@oss.qualcomm.com?part=14