[PATCH v5 04/11] phy: qualcomm: qmp-combo: Ignore Type-C orientation for Glymur DP mode

[Nabige Aala]

From: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>

Glymur platforms use a fixed DP lane mapping and do not support DP PHY
mode reversal based on Type-C orientation. Add a configuration flag to
ignore reverse orientation during DP mode setup and enable it for Glymur,
ensuring that QSERDES_DP_PHY_MODE is always programmed with the
fix mode value (0x5c).

Fixes: 815891eee6687 ("phy: qcom-qmp-combo: Introduce orientation variable")
Signed-off-by: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
Signed-off-by: Mahadevan P <mahadevan.p at oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b672adb33fc5..646e97a52886 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2551,6 +2551,9 @@ struct qmp_phy_cfg {
 	int (*calibrate_dp_phy)(struct qmp_combo *qmp);
 	void (*dp_aux_init)(struct qmp_combo *qmp);
 
+	/* Set if DP mode configuration should ignore TypeC orientation */
+	bool dp_mode_ignore_reverse;
+
 	/* USB4 specifics */
 	const struct qmp_phy_init_tbl *usb4_serdes_tbl;
 	int usb4_serdes_tbl_num;
@@ -3422,6 +3425,8 @@ static const struct qmp_phy_cfg glymur_usb3dpphy_cfg = {
 	.configure_dp_clocks	= qmp_v8_configure_dp_clocks,
 	.configure_dp_phy	= qmp_v8_configure_dp_phy,
 
+	.dp_mode_ignore_reverse	= true,
+
 	.regs			= qmp_v8_n3_usb43dpphy_regs_layout,
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
@@ -3570,6 +3575,7 @@ static void qmp_v3_configure_dp_tx(struct qmp_combo *qmp)
 static bool qmp_combo_configure_dp_mode(struct qmp_combo *qmp)
 {
 	bool reverse = (qmp->orientation == TYPEC_ORIENTATION_REVERSE);
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
 	u32 val;
 
@@ -3583,7 +3589,7 @@ static bool qmp_combo_configure_dp_mode(struct qmp_combo *qmp)
 
 	writel(val, qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
 
-	if (reverse)
+	if (reverse && !cfg->dp_mode_ignore_reverse)
 		writel(0x4c, qmp->dp_dp_phy + QSERDES_DP_PHY_MODE);
 	else
 		writel(0x5c, qmp->dp_dp_phy + QSERDES_DP_PHY_MODE);

-- 
2.34.1