[PATCH v23 03/15] phy: qcom-mipi-csi2: Add Kaanapali support

[Hangxiang Ma]

On 10/28/2026 11:26 PM, Abel Vesa wrote:
> On 26-10-28 08:20:37, Hangxiang Ma wrote:
>> Add the Kaanapali 3nm configuration for the standalone CSI2 DPHY
>> driver, including the Kaanapali common status offset and power domain.
>>
>> Reviewed-by: Bryan O'Donoghue <bod at kernel.org>
>> Signed-off-by: Hangxiang Ma <hangxiang.ma at oss.qualcomm.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c | 16 ++++++++++++++++
>>   drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c     |  1 +
>>   drivers/phy/qualcomm/phy-qcom-mipi-csi2.h          |  1 +
>>   3 files changed, 18 insertions(+)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
>> index 8cd331cfb4b3..658a39463104 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
>> @@ -389,3 +389,19 @@ const struct mipi_csi2phy_soc_cfg mipi_csi2_dphy_4nm_x1e = {
>>   	.genpds = x1e_genpds,
>>   	.num_genpds = ARRAY_SIZE(x1e_genpds),
>>   };
>> +
>> +const struct mipi_csi2phy_soc_cfg mipi_csi2_dphy_3nm_kaanapali = {
>> +	.ops = &phy_qcom_mipi_csi2_ops_3ph_1_0,
>> +	.reg_info = {
>> +		.init_seq = lane_regs_x1e80100,
>> +		.lane_array_size = ARRAY_SIZE(lane_regs_x1e80100),
>> +		.common_regs_offset = 0x1000,
>> +		.common_status_offset = 0x138,
>> +	},
>> +	.supply_names = (const char **)x1e_supplies,
>> +	.num_supplies = ARRAY_SIZE(x1e_supplies),
>> +	.clk_names = (const char **)x1e_clks,
>> +	.num_clk = ARRAY_SIZE(x1e_clks),
>> +	.genpds = x1e_genpds,
>> +	.num_genpds = ARRAY_SIZE(x1e_genpds),
>> +};
>> diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c
>> index c0a4fa20eaf0..aff9e66f0352 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c
>> @@ -444,6 +444,7 @@ static int phy_qcom_mipi_csi2_probe(struct platform_device *pdev)
>>   
>>   static const struct of_device_id phy_qcom_mipi_csi2_of_match_table[] = {
>>   	{ .compatible	= "qcom,x1e80100-csi2-phy", .data = &mipi_csi2_dphy_4nm_x1e },
>> +	{ .compatible	= "qcom,kaanapali-csi2-phy", .data = &mipi_csi2_dphy_3nm_kaanapali },
> 
> Nit: Shouldn't we sort by compatible here?
> 
> The rest looks good to me, so:
> 
> Reviewed-by: Abel Vesa <abel.vesa at oss.qualcomm.com>

ACK. Thanks for pointing this out.

---
Best Regards,
Hangxiang