[PATCH 09/11] phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator

[Biju]

From: Biju Das <biju.das.jz at bp.renesas.com>

devm_regulator_get_exclusive() initialises the regulator with
enable_count = 1, requiring the consumer to disable it before release.

Previously, the devm disable action was only registered when the
regulator was explicitly enabled, causing the cleanup path to skip
decrementing enable_count on device removal when the regulator was
left disabled.

Fix this by always registering the devm disable action when the regulator
is enabled (checked via regulator_is_enabled()), covering both the
explicitly-enabled case and the initial state set by
devm_regulator_get_exclusive().

This fixes WARN_ON enable count during regulator release.

Fixes: 24843404efe4 ("phy: renesas: phy-rcar-gen3-usb2: Control VBUS for RZ/G2L SoCs")
Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index d06fb52ed5f1..ef38c3b365d4 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -905,15 +905,17 @@ static int rcar_gen3_phy_usb2_vbus_regulator_get_exclusive_enable(struct rcar_ge
 	if (IS_ERR(channel->vbus))
 		return PTR_ERR(channel->vbus);
 
-	if (!enable)
-		return 0;
+	if (enable) {
+		ret = regulator_enable(channel->vbus);
+		if (ret)
+			return ret;
+	}
 
-	ret = regulator_enable(channel->vbus);
-	if (ret)
-		return ret;
+	if (regulator_is_enabled(channel->vbus))
+		return devm_add_action_or_reset(dev, rcar_gen3_phy_usb2_vbus_disable_action,
+						channel->vbus);
 
-	return devm_add_action_or_reset(dev, rcar_gen3_phy_usb2_vbus_disable_action,
-					channel->vbus);
+	return 0;
 }
 
 static int rcar_gen3_phy_usb2_vbus_regulator_register(struct rcar_gen3_chan *channel)
-- 
2.43.0