[PATCH 1/2] phy: zynqmp: fix clock error handling in xpsgtr_phy_init()

[Radhey Shyam Pandey]

Propagate clk_prepare_enable() failures to the caller instead of
returning success, and disable the reference clock on initialization
error paths to avoid leaking clock references when phy_exit() is not
called.

Fixes: 25d700833513 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
---
 drivers/phy/xilinx/phy-zynqmp.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index fe6b4925d166..c8230f2bda62 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -658,12 +658,13 @@ static int xpsgtr_phy_init(struct phy *phy)
 {
 	struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
 	struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
-	int ret = 0;
+	int ret;
 
 	mutex_lock(&gtr_dev->gtr_mutex);
 
 	/* Configure and enable the clock when peripheral phy_init call */
-	if (clk_prepare_enable(gtr_dev->clk[gtr_phy->refclk]))
+	ret = clk_prepare_enable(gtr_dev->clk[gtr_phy->refclk]);
+	if (ret)
 		goto out;
 
 	/* Skip initialization if not required. */
@@ -673,7 +674,7 @@ static int xpsgtr_phy_init(struct phy *phy)
 	if (gtr_dev->tx_term_fix) {
 		ret = xpsgtr_phy_tx_term_fix(gtr_phy);
 		if (ret < 0)
-			goto out;
+			goto out_disable_clk;
 
 		gtr_dev->tx_term_fix = false;
 	}
@@ -687,7 +688,7 @@ static int xpsgtr_phy_init(struct phy *phy)
 	 */
 	ret = xpsgtr_configure_pll(gtr_phy);
 	if (ret)
-		goto out;
+		goto out_disable_clk;
 
 	xpsgtr_lane_set_protocol(gtr_phy);
 
@@ -705,6 +706,10 @@ static int xpsgtr_phy_init(struct phy *phy)
 		break;
 	}
 
+	goto out;
+
+out_disable_clk:
+	clk_disable_unprepare(gtr_dev->clk[gtr_phy->refclk]);
 out:
 	mutex_unlock(&gtr_dev->gtr_mutex);
 	return ret;
-- 
2.43.0