[PATCH v3 1/4] dt-bindings: phy: motorola,cpcap-usb: add chrg_det interrupt

[Ivaylo Dimitrov]

Hi,

On 6.07.26 г. 20:14 ч., Conor Dooley wrote:
> On Sun, Jul 05, 2026 at 01:11:02PM +0300, Ivaylo Dimitrov wrote:
>> The CPCAP USB PHY driver uses the CPCAP charger detection interrupt
>> for DCP detection.
> 
> This is not currently true, the driver does not look for this interrupt
> at the time of this patch.
> 

Right, this is bad wording caused by the fact that initially the driver 
patch came before the binding patch.

>> Update the binding and example DTS to use the corresponding
>> "chrg_det" interrupt name.
> 
> Sounds to me like this new interrupt is optional, since until now it has
> not been needed? The patch however makes it mandatory. I think your
> driver patch also makes it mandatory, which will break older
> devicetrees.
> 

Oh, it is indeed not needed for proper DCP/SDP detection, after some 
experiments I was able to teach the driver to do proper detection by 
using current interrupts only.

> What makes this ABI break okay?
> 

Will send new series with schema/DT patches dropped.

Thanks and regards,
Ivo

> Thanks,
> Conor.
> 
>>
>> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75 at gmail.com>
>> ---
>>   .../devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml     | 6 ++++--
>>   1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
>> index 0febd04a61f4..523a8f8480d0 100644
>> --- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
>> +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
>> @@ -30,6 +30,7 @@ properties:
>>         - description: se1 interrupt
>>         - description: dm interrupt
>>         - description: dp interrupt
>> +      - description: charger detection interrupt
>>   
>>     interrupt-names:
>>       description: Interrupt names
>> @@ -43,6 +44,7 @@ properties:
>>         - const: se1
>>         - const: dm
>>         - const: dp
>> +      - const: chrg_det
>>   
>>     io-channels:
>>       description: IIO ADC channels used by the USB PHY
>> @@ -91,10 +93,10 @@ examples:
>>           interrupts-extended = <
>>               &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
>>               &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
>> -            &cpcap 48 1
>> +            &cpcap 48 1 &cpcap 13 0
>>           >;
>>           interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld",
>> -                          "sessvld", "sessend", "se1", "dm", "dp";
>> +                          "sessvld", "sessend", "se1", "dm", "dp", "chrg_det";
>>           io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
>>           io-channel-names = "vbus", "id";
>>           vusb-supply = <&vusb>;
>> -- 
>> 2.39.5
>>