[PATCH] phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4

[Neil Armstrong]

On 2/19/26 12:11, Abel Vesa wrote:
> According to internal documentation, on SM8650, when the PHY is configured
> in Gear 4, the QPHY_V6_PCS_UFS_PLL_CNTL register needs to have the same
> value as for Gear 5.
> 
> At the moment, there is no board that comes with a UFS 3.x device, so
> this issue doesn't show up, but with the new Eliza SoC, which uses the
> same init sequence as SM8650, on the MTP board, the link startup fails
> with the current Gear 4 PCS table.
> 
> So fix that by moving the entry into the PCS generic table instead,
> while keeping the value from Gear 5 configuration.
> 
> Cc: stable at vger.kernel.org # v6.10
> Fixes: b9251e64a96f ("phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5")
> Suggested-by: Nitin Rawat <nitin.rawat at oss.qualcomm.com>
> Signed-off-by: Abel Vesa <abel.vesa at oss.qualcomm.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index df138a5442eb..771bc7c2ab50 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -990,6 +990,7 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_pcs[] = {
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0xc1),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x68),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4, 0x0e),
> @@ -999,13 +1000,11 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_pcs[] = {
>   };
>   
>   static const struct qmp_phy_init_tbl sm8650_ufsphy_g4_pcs[] = {
> -	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x13),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
>   };
>   
>   static const struct qmp_phy_init_tbl sm8650_ufsphy_g5_pcs[] = {
> -	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x05),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x05),
>   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4d),
> 
> ---
> base-commit: 50f68cc7be0a2cbf54d8f6aaf17df32fb01acc3f
> change-id: 20260219-phy-qcom-qmp-ufs-fix-sm8650-pcs-g4-table-9d1adf1508fb
> 
> Best regards,
> --
> Abel Vesa <abel.vesa at oss.qualcomm.com>
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
Tested-by: Neil Armstrong <neil.armstrong at linaro.org> # on SM8650-HDK

Thanks,
Neil