[PATCH 24/38] arm64: dts: mediatek: mt7986a-bpi-r3: Fix SFP I2C node names

[Matthias Brugger]

On 24/07/2025 10:39, AngeloGioacchino Del Regno wrote:
> The binding wants the node to be named "i2c-number", alternatively
> "i2c at address", but those are named "i2c-gpio-number" instead.
> 
> Rename those to i2c-0, i2c-1 to adhere to the binding and suppress
> dtbs_check warnings.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Applied, thanks

> ---
>   arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 8 ++------
>   1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
> index ed79ad1ae871..6d2762866a1a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
> @@ -64,23 +64,19 @@ wps-key {
>   	};
>   
>   	/* i2c of the left SFP cage (wan) */
> -	i2c_sfp1: i2c-gpio-0 {
> +	i2c_sfp1: i2c-0 {
>   		compatible = "i2c-gpio";
>   		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>   		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>   		i2c-gpio,delay-us = <2>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
>   	};
>   
>   	/* i2c of the right SFP cage (lan) */
> -	i2c_sfp2: i2c-gpio-1 {
> +	i2c_sfp2: i2c-1 {
>   		compatible = "i2c-gpio";
>   		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>   		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>   		i2c-gpio,delay-us = <2>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
>   	};
>   
>   	leds {