[PATCH v4 10/13] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs

[Xiangxu Yin]

On 9/12/2025 6:31 PM, Dmitry Baryshkov wrote:
> On Thu, Sep 11, 2025 at 10:55:07PM +0800, Xiangxu Yin wrote:
>> Define qmp_usbc_dp_phy_ops struct to support DP mode on USB/DP
>> switchable PHYs.
>>
>> Signed-off-by: Xiangxu Yin <xiangxu.yin at oss.qualcomm.com>
>> ---
>>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 192 ++++++++++++++++++++++++++++++-
>>  1 file changed, 191 insertions(+), 1 deletion(-)
>>
>> @@ -1669,6 +1832,23 @@ static int qmp_usbc_parse_tcsr(struct qmp_usbc *qmp)
>>  	return 0;
>>  }
>>  
>> +static struct phy *qmp_usbc_phy_xlate(struct device *dev, const struct of_phandle_args *args)
>> +{
>> +	struct qmp_usbc *qmp = dev_get_drvdata(dev);
>> +
>> +	if (args->args_count == 0)
>> +		return qmp->usb_phy;
>> +
>> +	switch (args->args[0]) {
>> +	case QMP_USB43DP_USB3_PHY:
>> +		return qmp->usb_phy;
>> +	case QMP_USB43DP_DP_PHY:
>> +		return qmp->dp_phy;
> return qmp->dp_phy ?: ERR_PTR(-ENODEV);
>
> We are not expected to return NULL here (and dp_phy can be NULL).


Ack. will update.


>> +	}
>> +
>> +	return ERR_PTR(-EINVAL);
>> +}
>> +
>>  static int qmp_usbc_probe(struct platform_device *pdev)
>>  {
>>  	struct device *dev = &pdev->dev;
>> @@ -1743,9 +1923,19 @@ static int qmp_usbc_probe(struct platform_device *pdev)
>>  
>>  	phy_set_drvdata(qmp->usb_phy, qmp);
>>  
>> +	if (qmp->dp_serdes != 0) {
>> +		qmp->dp_phy = devm_phy_create(dev, np, &qmp_usbc_dp_phy_ops);
>> +		if (IS_ERR(qmp->dp_phy)) {
>> +			ret = PTR_ERR(qmp->dp_phy);
>> +			dev_err(dev, "failed to create PHY: %d\n", ret);
>> +			goto err_node_put;
>> +		}
>> +		phy_set_drvdata(qmp->dp_phy, qmp);
>> +	}
>> +
>>  	of_node_put(np);
>>  
>> -	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +	phy_provider = devm_of_phy_provider_register(dev, qmp_usbc_phy_xlate);
>>  
>>  	return PTR_ERR_OR_ZERO(phy_provider);
>>  
>>
>> -- 
>> 2.34.1
>>