[PATCH v4 10/13] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs

[Dmitry Baryshkov]

On Thu, Sep 11, 2025 at 10:55:07PM +0800, Xiangxu Yin wrote:
> Define qmp_usbc_dp_phy_ops struct to support DP mode on USB/DP
> switchable PHYs.
> 
> Signed-off-by: Xiangxu Yin <xiangxu.yin at oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 192 ++++++++++++++++++++++++++++++-
>  1 file changed, 191 insertions(+), 1 deletion(-)
> 
> @@ -1669,6 +1832,23 @@ static int qmp_usbc_parse_tcsr(struct qmp_usbc *qmp)
>  	return 0;
>  }
>  
> +static struct phy *qmp_usbc_phy_xlate(struct device *dev, const struct of_phandle_args *args)
> +{
> +	struct qmp_usbc *qmp = dev_get_drvdata(dev);
> +
> +	if (args->args_count == 0)
> +		return qmp->usb_phy;
> +
> +	switch (args->args[0]) {
> +	case QMP_USB43DP_USB3_PHY:
> +		return qmp->usb_phy;
> +	case QMP_USB43DP_DP_PHY:
> +		return qmp->dp_phy;

return qmp->dp_phy ?: ERR_PTR(-ENODEV);

We are not expected to return NULL here (and dp_phy can be NULL).

> +	}
> +
> +	return ERR_PTR(-EINVAL);
> +}
> +
>  static int qmp_usbc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1743,9 +1923,19 @@ static int qmp_usbc_probe(struct platform_device *pdev)
>  
>  	phy_set_drvdata(qmp->usb_phy, qmp);
>  
> +	if (qmp->dp_serdes != 0) {
> +		qmp->dp_phy = devm_phy_create(dev, np, &qmp_usbc_dp_phy_ops);
> +		if (IS_ERR(qmp->dp_phy)) {
> +			ret = PTR_ERR(qmp->dp_phy);
> +			dev_err(dev, "failed to create PHY: %d\n", ret);
> +			goto err_node_put;
> +		}
> +		phy_set_drvdata(qmp->dp_phy, qmp);
> +	}
> +
>  	of_node_put(np);
>  
> -	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	phy_provider = devm_of_phy_provider_register(dev, qmp_usbc_phy_xlate);
>  
>  	return PTR_ERR_OR_ZERO(phy_provider);
>  
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry