[PATCH 04/18] reset: rzv2h-usb2phy: Set VBENCTL register for OTG mode
Tommaso Merciai
tommaso.merciai.xr at bp.renesas.com
Wed Oct 1 14:26:48 PDT 2025
Add logic to set the VBENCTL register when the USB controller operates in
OTG mode. This is required to ensure proper USB transceiver behavior when
the device is configured as OTG.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
---
drivers/reset/reset-rzv2h-usb2phy.c | 57 +++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/reset/reset-rzv2h-usb2phy.c b/drivers/reset/reset-rzv2h-usb2phy.c
index 7cd559bc52aa..059915cbace5 100644
--- a/drivers/reset/reset-rzv2h-usb2phy.c
+++ b/drivers/reset/reset-rzv2h-usb2phy.c
@@ -10,10 +10,14 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/reset-controller.h>
+#include <linux/usb/of.h>
+
+#define VBENCTL 0xf0c
struct rzv2h_usb2phy_regval {
u16 reg;
@@ -111,6 +115,57 @@ static int rzv2h_usb2phy_reset_of_xlate(struct reset_controller_dev *rcdev,
return 0;
}
+static enum usb_dr_mode
+rzv2h_usb2phy_reset_of_usb_get_dr_mode_by_reset(struct device_node *np)
+{
+ struct device_node *controller;
+ struct of_phandle_args args;
+ struct platform_device *pd;
+ const char *dr_mode_str;
+ enum usb_dr_mode dr_mode;
+ int index;
+
+ for_each_node_with_property(controller, "dr_mode") {
+ index = 0;
+ while (!of_parse_phandle_with_args(controller, "resets",
+ "#reset-cells", index++,
+ &args)) {
+ if (args.np == np) {
+ of_node_put(args.np);
+
+ if (!of_property_read_string(controller,
+ "dr_mode",
+ &dr_mode_str)) {
+ pd = of_find_device_by_node(controller);
+ dr_mode = usb_get_dr_mode(&pd->dev);
+ of_node_put(controller);
+ put_device(&pd->dev);
+ return dr_mode;
+ }
+
+ of_node_put(controller);
+ break;
+ }
+ of_node_put(args.np);
+ }
+ of_node_put(controller);
+ }
+
+ return USB_DR_MODE_UNKNOWN;
+}
+
+static void rzv2h_usb2phy_reset_setup_vbenctl(struct rzv2h_usb2phy_reset_priv *priv)
+{
+ struct device *dev = priv->rcdev.dev;
+ enum usb_dr_mode dr_mode;
+
+ dr_mode = rzv2h_usb2phy_reset_of_usb_get_dr_mode_by_reset(dev->of_node);
+ dev_dbg(priv->rcdev.dev, "dr_mode: %d\n", dr_mode);
+
+ if (dr_mode == USB_DR_MODE_OTG)
+ writel(BIT(0), priv->base + VBENCTL);
+}
+
static void rzv2h_usb2phy_reset_pm_runtime_put(void *data)
{
pm_runtime_put(data);
@@ -172,6 +227,8 @@ static int rzv2h_usb2phy_reset_probe(struct platform_device *pdev)
if (error)
return dev_err_probe(dev, error, "could not register reset controller\n");
+ rzv2h_usb2phy_reset_setup_vbenctl(priv);
+
return 0;
}
--
2.43.0
More information about the linux-phy
mailing list