[PATCH 4/4] phy: qualcomm: phy-qcom-eusb2-repeater: Add support for PMIV0104

[Abel Vesa]

On 25-06-25 11:14:59, Luca Weiss wrote:
> Add support for the eUSB2 repeater found on the PMIV0104. There is no
> default init table for this PMIC, just the board-specific tuning
> parameters are used on top of the default tuning values.
> 
> Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>

Reviewed-by: Abel Vesa <abel.vesa at linaro.org>