[PATCH] phy: qcom-qmp-ufs: Fix HS-G4 PHY init table for sc7280

[Nitin Rawat]

On 7/5/2025 6:56 PM, Xilin Wu wrote:
> On 2025/7/5 21:06:56, Dmitry Baryshkov wrote:
>> On Fri, Jun 13, 2025 at 10:41:48PM +0800, Xilin Wu wrote:
>>> The PHY is limited to operating in HS-G3 mode during the initial PCS
>>> registers initialization. Extra PHY init sequence is required to allow
>>> HS-G4 mode to work when needed.
>>
>> I can't find corresponding settings in either of HPGs.
>>
> 
> I believe there was a mistake when initially adding support for sc7280 
> UFS PHY based on downstream code. In downstream [1] the 
> HSGEAR_CAPABILITY registers are programmed to 0x3 **only** when Gear 4 
> is not needed, while the current upstream driver always writes to this 
> register regardless of the UFS Gear. [2]


Hi Xilin, Dmitry

The SC7280 is based on the SM8150 for gear 3 and the SM8250 for gear 4. 
The sm8150_ufsphy_hs_g4_pcs table is identical for both the SM8250 and 
SM8150, and is used for gear 4 settings for sc7180, SM8250 and SM8150.

Additionally, the current code applies tbls table by default for all 
gears. We need a separate overlay table for gear3 similar to overlay 
tables 0 and 1 for gear 4 and gear 5, respectively.

For settings specific to gear 3, such as 
QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND and 
QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY, we can include them in the overlay 
table for gear 3.





> 
> I don't have access to the HPGs. The Gear4 specific init sequence is 
> found in the Qualcomm proprietary UEFI driver code.
> 
> [1]:https://github.com/NothingOSS/android_kernel_msm-5.4_nothing_sm7325/ 
> blob/sm7325/s/drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-yupik.h#L355
> 
> [2]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux- 
> next.git/tree/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c#n215
> 
>>>
>>> Fixes: 8abe9792d1ff ("phy: qcom-qmp-ufs: Add Phy Configuration 
>>> support for SC7280")
>>> Signed-off-by: Xilin Wu <sophon at radxa.com>
>>> ---
>>> This might need testing on sm8150, sm8250 and sc8180x as well.
>>> ---
>>>   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 7 +++++++
>>>   1 file changed, 7 insertions(+)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/ 
>>> qualcomm/phy-qcom-qmp-ufs.c
>>> index 
>>> b33e2e2b5014d3ca8f19b623ba080887f53e616d..7797be329d75f95c80863e05351d0cf55fdf38c2 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>>> @@ -570,6 +570,13 @@ static const struct qmp_phy_init_tbl 
>>> sm8150_ufsphy_pcs[] = {
>>>   static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_pcs[] = {
>>>       QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x10),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_PLL_CNTL, 0x0b),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 
>>> 0x2d),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 
>>> 0xb0),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND, 0xff),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND, 0x1b),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
>>> +    QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
>>>       QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),

There setting are not mention in UFS PHY HPG.

Regards,
Nitin

>>>   };
>>>
>>> ---
>>> base-commit: bc6e0ba6c9bafa6241b05524b9829808056ac4ad
>>> change-id: 20250613-sc7280-ufsphy-g4-fix-024542f31fac
>>>
>>> Best regards,
>>> -- 
>>> Xilin Wu <sophon at radxa.com>
>>>
>>
> 
>