[PATCH v5 0/5] Add support for DisplayPort on SA8775P platform

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Fri Oct 18 03:08:08 PDT 2024


On Fri, Oct 18, 2024 at 12:37:01PM +0530, Soutrik Mukhopadhyay wrote:
> This series adds support for the DisplayPort controller
> and eDP PHY v5 found on the Qualcomm SA8775P platform.
> 
> ---
> v2: Fixed review comments from Dmitry and Bjorn
> 	- Made aux_cfg array as const.
> 	- Reused edp_swing_hbr_rbr and edp_swing_hbr2_hbr3 for v5.
> 
> v3: Fixed review comments from Dmitry, Konrad and Bjorn
> 	- Used a for loop to write the dp_phy_aux_cfg registers.
> 	- Pre-defined the aux_cfg size to prevent any magic numbers.
> 	- Added all the necessary DPTX controllers for this platform.
> 
> v4: Fixed review comments from Dmitry and Krzysztof
> 	- Removed the "reviewed by" and kept only the "acked by" for 
> 	  patch 1.
> 	- Updated the commit message of patch 5 to mention specifically
> 	  about the validation of "only" MDSS0 DPTX0 and DPTX1.
> 
> v5: Fixed review comment from Dmitry in patch 5
> 	- Aligned the register starting address for display port as part 
> 	  of device description with respect to other targets.
> 
> Below patches are applied:
> 
> [1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
>       commit: 7adb3d221a4d6a4f5e0793c3bd35f1168934035c
> [2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
>       commit: 913463587d528d766a8e12c7790995e273ec84fb
> [3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
>       commit: 3f12bf16213c30d8e645027efd94a19c13ee0253

Please in future skip applied patches instead of including them into the
series.  No need to resend the series just for this issue though.

> 
> ---
> 
> Soutrik Mukhopadhyay (5):
>   dt-bindings: phy: Add eDP PHY compatible for sa8775p
>   phy: qcom: edp: Introduce aux_cfg array for version specific aux
>     settings
>   phy: qcom: edp: Add support for eDP PHY on SA8775P
>   dt-bindings: display: msm: dp-controller: document SA8775P compatible
>   drm/msm/dp: Add DisplayPort controller for SA8775P
> 
>  .../bindings/display/msm/dp-controller.yaml   |  1 +
>  .../devicetree/bindings/phy/qcom,edp-phy.yaml |  1 +
>  drivers/gpu/drm/msm/dp/dp_display.c           |  9 +++
>  drivers/phy/qualcomm/phy-qcom-edp.c           | 74 +++++++++++++------
>  4 files changed, 61 insertions(+), 24 deletions(-)
> 
> -- 
> 2.17.1
> 

-- 
With best wishes
Dmitry



More information about the linux-phy mailing list