[PATCH v5 0/5] Add support for DisplayPort on SA8775P platform

[Soutrik Mukhopadhyay]

This series adds support for the DisplayPort controller
and eDP PHY v5 found on the Qualcomm SA8775P platform.

---
v2: Fixed review comments from Dmitry and Bjorn
	- Made aux_cfg array as const.
	- Reused edp_swing_hbr_rbr and edp_swing_hbr2_hbr3 for v5.

v3: Fixed review comments from Dmitry, Konrad and Bjorn
	- Used a for loop to write the dp_phy_aux_cfg registers.
	- Pre-defined the aux_cfg size to prevent any magic numbers.
	- Added all the necessary DPTX controllers for this platform.

v4: Fixed review comments from Dmitry and Krzysztof
	- Removed the "reviewed by" and kept only the "acked by" for 
	  patch 1.
	- Updated the commit message of patch 5 to mention specifically
	  about the validation of "only" MDSS0 DPTX0 and DPTX1.

v5: Fixed review comment from Dmitry in patch 5
	- Aligned the register starting address for display port as part 
	  of device description with respect to other targets.

Below patches are applied:

[1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
      commit: 7adb3d221a4d6a4f5e0793c3bd35f1168934035c
[2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
      commit: 913463587d528d766a8e12c7790995e273ec84fb
[3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
      commit: 3f12bf16213c30d8e645027efd94a19c13ee0253

---

Soutrik Mukhopadhyay (5):
  dt-bindings: phy: Add eDP PHY compatible for sa8775p
  phy: qcom: edp: Introduce aux_cfg array for version specific aux
    settings
  phy: qcom: edp: Add support for eDP PHY on SA8775P
  dt-bindings: display: msm: dp-controller: document SA8775P compatible
  drm/msm/dp: Add DisplayPort controller for SA8775P

 .../bindings/display/msm/dp-controller.yaml   |  1 +
 .../devicetree/bindings/phy/qcom,edp-phy.yaml |  1 +
 drivers/gpu/drm/msm/dp/dp_display.c           |  9 +++
 drivers/phy/qualcomm/phy-qcom-edp.c           | 74 +++++++++++++------
 4 files changed, 61 insertions(+), 24 deletions(-)

-- 
2.17.1