[PATCH v7 2/2] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support

[Vinod Koul]

On 20-06-24, 09:30, Guenter Roeck wrote:
> On Wed, May 29, 2024 at 02:02:45PM +0800, Richard Zhu wrote:
> > Add i.MX8QM HSIO PHY driver support.
> > 
> > i.MX8QM HSIO has three lane PHY instances, and can be bound to the
> > following controllers in the different use cases listed in below table.
> > - two lanes capable PCIEA controller.
> > - one lane PCIEB controller.
> > - AHCI SATA controller.
> > 
> > i.MX8QM HSIO PHYs support the following use cases.
> > +----------------------------------------------------+
> > |                               | Lane0| Lane1| Lane2|
> > |-------------------------------|------|------|------|
> > | use case 1: PCIEAX2SATA       | PCIEA| PCIEA| SATA |
> > |-------------------------------|------|------|------|
> > | use case 2: PCIEAX2PCIEB      | PCIEA| PCIEA| PCIEB|
> > |-------------------------------|------|------|------|
> > | use case 3: PCIEAPCIEBSATA    | PCIEA| PCIEB| SATA |
> > +----------------------------------------------------+
> > 
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > Reviewed-by: Frank Li <Frank.Li at nxp.com>
> 
> Building alpha:allmodconfig ... failed
> --------------
> Error log:
> drivers/phy/freescale/phy-fsl-imx8qm-hsio.c: In function 'imx_hsio_set_mode':
> drivers/phy/freescale/phy-fsl-imx8qm-hsio.c:459:15: error: implicit declaration of function 'FIELD_PREP'

It should be fixed in -next tomorrow. I have applied a patch for that

-- 
~Vinod